The P1918 automobile fault code indicates a problem with the Transmission Range Display, which can cause the Engine Light to turn on. The possible causes of this issue include a faulty display, an open or shorted harness, or a poor electrical connection. To fix this problem, one should visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0.

It is important to address this issue promptly to avoid any further damage to the vehicle’s transmission.

To interpret the fault code, one can use an OBD-II scanner or take the vehicle to a mechanic for diagnosis.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you notice the Engine Light ON, it could be a sign of p1918 fault code.

Here are some symptoms to look out for:

  • The P1918 fault code in an automobile can cause the following symptoms: Engine Light ON, Service Engine Soon Warning Light ON, engine misfire, rough idling, reduced engine power, poor acceleration, stalling, and increased fuel consumption.
  • It is important to address these symptoms promptly to avoid further damage to the vehicle.

P1918 fault code can be caused by a faulty transmission range display, open or shorted harness, or poor electrical connection.

  • The automobile fault code P1918 can be caused by a faulty transmission range display.
  • It can also be caused by an open or shorted transmission range display harness.
  • Additionally, a poor electrical connection in the transmission range display circuit can also trigger this fault code.

To fix the p1918 automobile fault code, check the possible causes and inspect the related wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code P1918, you need to check the possible causes listed above.
  • Visually inspect the related wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded connector’s pins.
  • This fix will take an estimated repair time of 1.0 hour.

The fault code P1918 indicates a problem with the transmission range sensor circuit. The estimated repair time for this fault code is 1.0 hour.

The cost of fixing this issue can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour. Other factors that may influence the cost include the severity of the problem, the type of vehicle, and the location of the repair shop.

The P1918 code is a transmission range display circuit malfunction. This is a generic description, and the manufacturer may have a different description for your specific vehicle.

Unfortunately, we do not have any further information about this code at this time.

If you have any questions or concerns, please feel free to post them in the comments section below.

What are the possible causes of the P1918 automobile fault code?

If you see the engine light on or the service engine soon warning light, it could be due to the P1918 fault code. This code is caused by a faulty transmission range display, an open or shorted transmission range display harness, or a poor electrical connection in the transmission range display circuit. To fix this issue, you should visually inspect the related wiring harness and connectors, check for damaged components, and look for broken, bent, pushed out, or corroded connector’s pins.

How can I visually inspect the related wiring harness and connectors to fix the P1918 fault code?

If you’re experiencing an Engine Light ON or Service Engine Soon Warning Light due to a P1918 fault code, you may need to visually inspect the related wiring harness and connectors. This fault code is often caused by a faulty Transmission Range Display, an open or shorted Transmission Range Display harness, or a poor electrical connection in the Transmission Range Display circuit. To fix the issue, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

What are the specific steps I can take to check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins to fix the P1918 fault code?

If you’re experiencing the P1918 fault code, start by checking the “Possible Causes” listed above. Then, visually inspect the related wiring harness and connectors. Look for damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This will help you identify any issues with the Transmission Range Display harness and circuit, which could be causing the Engine Light to turn on.

p1918 error fault code explained

If your engine light is on, it could be due to a faulty transmission range display, an open or shorted harness, or poor electrical connection. Visually inspect the wiring harness and connectors for damage or corrosion. Check for broken, bent, or pushed out pins.

Scroll to Top