[SOLVED] P1907 Code: How To Fix Kickdown Hold Relay Circuit Issues

The P1907 fault code in automobiles indicates a problem with the Kickdown Hold Relay circuit, which can cause the engine light to turn on.

The possible causes of this fault code include a faulty Kickdown Hold Relay, an open or shorted harness, or poor electrical connections. To fix this issue, one should visually inspect the wiring harness and connectors for any damage or corrosion.

The repair time for this issue is estimated to be around 1.0. It is important to address this issue promptly to avoid any further damage to the vehicle.

To interpret the fault code, one can use an OBD-II scanner or take the vehicle to a mechanic for diagnosis.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

P1907: Uncovering The Symptoms Of This Auto Fault Code

If you notice the Engine Light ON or Service Engine Soon Warning Light, it could be a sign of p1907 fault code. Here are the symptoms to look out for:

• The P1907 fault code in an automobile can cause several symptoms, including the engine light turning on or the service engine soon warning light appearing.
• Other symptoms may include a decrease in engine power, rough idling, stalling, or difficulty starting the engine.
• The vehicle may also experience transmission shifting issues, such as delayed or harsh shifting.
• Additionally, the fuel economy may decrease, and the vehicle may emit black smoke from the exhaust.
• It is important to address these symptoms promptly to prevent further damage to the vehicle.

P1907: Uncovering The Culprits Behind The Code

P1907 fault code can be caused by various issues such as a faulty kickdown hold relay, open or shorted harness, and poor electrical connection.

• The automobile fault code P1907 can be caused by a faulty Kickdown Hold Relay.
• It can also be caused by an open or shorted Kickdown Hold Relay harness.
• Additionally, a poor electrical connection in the Kickdown Hold Relay circuit can also trigger this fault code.

Fix Code P1907: Simple Steps To Get Your Car Running

Below are the possible fixes for the automobile fault code p1907, including inspecting wiring harness and connectors for damage or corrosion.

• To fix the automobile fault code P1907, you need to check the possible causes listed above.
• Visually inspect the related wiring harness and connectors.
• Look for damaged components and broken, bent, pushed out, or corroded connector’s pins.
• This fix will take an estimated repair time of 1.0 hour.

P1907: Affordable Fix For Complex Automobiles

The fault code P1907 indicates a malfunction in the engine’s crankshaft position sensor circuit. The estimated repair time for this fault is 1.0 hour.

The cost of fixing this fault is influenced by the hourly rate charged by the auto repair shop, which is typically between $75 and $150 per hour. Other factors that may affect the cost include the cost of the replacement parts, the complexity of the repair, and the location of the repair shop.

P1907: Unleashing The Mystery Of The Fault Code

The P1907 code is a generic description for Kickdown Hold Relay Open or Short Circuit to Ground. However, the manufacturer may have a different description for your specific vehicle model and year.

Unfortunately, we do not have any additional information about this code at this time. If you have any questions or concerns, please feel free to post them in the comments section below for more information.

FAQ

Wrap Up

If your engine light is on, it could be due to a faulty Kickdown Hold Relay, an open or shorted harness, or poor electrical connection.

Visually inspect the wiring harness and connectors for damage or corrosion.

Check for broken, bent, or pushed out connector pins.

Resources

• Resource 1
• Resource 2
• Resource 3
• Resource 4