The automobile fault code P18C3 indicates a problem with the Transmission Internal Mode Switch. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty switch, an open or shorted harness, poor electrical connection, or a faulty Transmission Control Module (TCM).

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p18c3 fault code.

  • The symptoms of the automobile fault code p18c3 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p18c3 can be caused by a faulty Transmission Internal Mode Switch, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Transmission Control Module (TCM).

  • The fault code P18C3 can be caused by: a faulty Transmission Internal Mode Switch, an open or shorted harness for the Transmission Internal Mode Switch, a poor electrical connection in the Transmission Internal Mode Switch circuit, or a faulty Transmission Control Module (TCM).

To fix the automobile fault code p18c3, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p18c3, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p18c3 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.

The P18C3 fault code refers to the Internal Mode Switch ‘S’ Circuit Stuck On Invalid Voltage Range. This code is related to the Transmission Control Module (TCM) and indicates that the gear position selected by the vehicle operator is not being properly recognized. The internal mode switch consists of 5 separate hall effect switches, each supplied with a 9V reference circuit and a signal circuit from the TCM.

These signal circuits provide voltage readings that indicate whether a particular gear selector position is on or off.

When the TCM detects that the internal mode switch ‘S’ signal circuit has an invalid voltage range of 0.70 – 0.96V for 2.7 seconds, it sets the P18C3 fault code.

This means that the TCM is not receiving the correct voltage readings for the gear selector position, leading to a malfunction in the system.

To resolve this issue, it is recommended to have the vehicle diagnosed by a qualified technician who can inspect the internal mode switch and its circuits.

They will be able to determine the exact cause of the problem and perform the necessary repairs or replacements to fix the fault code.

What are the possible causes for the automobile fault code P18C3?

If you see the engine light or service engine soon warning light on, the fault code P18C3 could be the culprit. This code is often caused by a faulty transmission internal mode switch, an open or shorted harness, a poor electrical connection in the switch circuit, or a faulty transmission control module (TCM). To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the P18C3 fault code?

To fix the P18C3 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the Transmission Internal Mode Switch or the Transmission Control Module. Don’t forget to check the “Possible Causes” mentioned above for a comprehensive solution.

What should I look for when checking for damaged components and connector pins to resolve the P18C3 fault code?

When resolving the P18C3 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them. Don’t forget to also check the other possible causes listed above to ensure a comprehensive solution.

p18c3 error fault code explained

If your engine light is on, it could be due to a faulty Transmission Internal Mode Switch or issues with the wiring harness and connectors.

To fix this, visually inspect the wiring and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top