The automobile fault code P1897 indicates a problem with the CVT Driven Pulley Pressure Control Valve. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on. The cause of this fault code could be a faulty valve, an open or shorted harness, or a poor electrical connection.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1897 fault code.

  • The symptoms of the automobile fault code P1897 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1897 can be caused by a faulty CVT Driven Pulley Pressure Control Valve, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code P1897 can be caused by: a faulty CVT Driven Pulley Pressure Control Valve, an open or shorted harness of the CVT Driven Pulley Pressure Control Valve, or a poor electrical connection in the CVT Driven Pulley Pressure Control Valve circuit.

To fix the automobile fault code p1897, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1897, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1897 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P1897 code refers to a problem with the CVT Driven Pulley Pressure Control Valve Circuit. This code indicates that there is a high voltage or resistance issue in the circuit. It is important to note that the specific description of this code may vary depending on the make and model of your vehicle.

Unfortunately, we do not have any additional information about the P1897 code at this time.

If you have any further questions or need more information, please feel free to ask in the comments section below.

What are the possible causes of the automobile fault code p1897 and how can I visually inspect them?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1897 could be the culprit. This code is often caused by a faulty CVT Driven Pulley Pressure Control Valve or issues with the valve’s harness and circuit connection. To visually inspect these potential causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also examine the components for any signs of damage.

How can I determine if the CVT Driven Pulley Pressure Control Valve harness is open or shorted?

If you’re experiencing the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty CVT Driven Pulley Pressure Control Valve or an open or shorted harness. To determine if the harness is the issue, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. This simple check can help you identify and fix the problem.

What steps should I take to check for damaged components and inspect the wiring harness and connectors related to the fault code p1897?

To check for damaged components and inspect the wiring harness and connectors related to fault code P1897, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. Additionally, check for any faulty CVT Driven Pulley Pressure Control Valve or if the harness is open or shorted. Ensure there are no poor electrical connections in the CVT Driven Pulley Pressure Control Valve circuit.

p1897 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the likely cause is a faulty CVT Driven Pulley Pressure Control Valve. To fix it, visually inspect the wiring harness and connectors for any damage.

Also, check for broken, bent, pushed out, or corroded connector pins. Act now to prevent further issues.

Scroll to Top