The automobile fault code P1892 indicates a problem with the Throttle Position Sensor (TPS).

When this fault code is triggered, the Engine Light or Service Engine Soon Warning Light will illuminate. The cause of this issue could be a faulty TPS, an open or shorted TPS harness, or a poor electrical connection in the TPS circuit. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour. It is important to address this fault code promptly to ensure optimal engine performance.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1892 fault code.

  • The symptoms of the automobile fault code P1892 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1892 can be caused by a faulty Throttle Position Sensor, an open or shorted Throttle Position Sensor harness, or a poor electrical connection in the Throttle Position Sensor circuit.

  • The fault code P1892 can be caused by a faulty Throttle Position Sensor.
  • It can also be caused by an open or shorted Throttle Position Sensor harness.
  • Additionally, a poor electrical connection in the Throttle Position Sensor circuit can also trigger this fault code.

To resolve the p1892 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1892, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code p1892 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1892 code refers to a problem with the Throttle Position Sensor (TPS) PWM Signal being too high. This code is a generic description, and the specific description may vary depending on the make and model of your vehicle.

Unfortunately, we do not have any additional information about this particular code at the moment.

If you have any questions or need more information, please feel free to ask in the comments section below.

What are the possible causes for the automobile fault code P1892 and how can I visually inspect them?

If you’re seeing the P1892 fault code and your engine light is on, it could be due to a faulty Throttle Position Sensor, an open or shorted Throttle Position Sensor harness, or a poor electrical connection in the Throttle Position Sensor circuit. To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also examine any related components.

How does a faulty Throttle Position Sensor contribute to the engine light being ON and what steps can I take to fix it?

If you notice that your engine light is on or you see a service engine soon warning light, it could be due to a faulty Throttle Position Sensor (TPS). This can happen if the TPS harness is open or shorted, or if there is a poor electrical connection in the TPS circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken components. Additionally, look out for any bent, pushed out, or corroded pins in the connectors. Taking these steps can help resolve the problem and turn off the engine light.

What should I look for when inspecting the wiring harness and connectors related to the Throttle Position Sensor to address the P1892 fault code?

When inspecting the wiring harness and connectors related to the Throttle Position Sensor to address the P1892 fault code, there are a few things to look for. Visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection and lead to the fault code. By checking and addressing these possible causes, you can effectively fix the problem and get rid of the Engine Light or Service Engine Soon Warning Light.

p1892 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Throttle Position Sensor or issues with the sensor’s wiring harness and circuit connection.

To fix this, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken or bent pins as well.

Scroll to Top