The automobile fault code P1891 indicates a problem with the Transfer Case Motor. When this fault code is triggered, the Engine Light or Service Engine Soon Warning Light will turn on.

The possible causes for this issue include a faulty Transfer Case Motor, an open or shorted Transfer Case Motor harness, or a poor electrical connection in the Transfer Case Motor circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1891 fault code.

  • The symptoms of the automobile fault code P1891 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1891 can be caused by a faulty transfer case motor, an open or shorted transfer case motor harness, or a poor electrical connection in the transfer case motor circuit.

  • The fault code P1891 can be caused by the following: a faulty transfer case motor, an open or shorted transfer case motor harness, and a poor electrical connection in the transfer case motor circuit.

To fix the automobile fault code p1891, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1891, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The automobile fault code P1891 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1891 fault code refers to a problem with the Transmission Transfer Case Contact Plate Ground Return. This means that there is an open circuit in the ground return of the contact plate in the transfer case of your vehicle. It is important to note that the specific description of this code may vary depending on the make and model of your vehicle.

Unfortunately, we do not have any further information about this particular fault code at the moment.

If you have any questions or need more information, please feel free to ask in the comments section below.

What are the possible causes for the automobile fault code P1891 and how can I visually inspect them?

If you’re seeing the dreaded P1891 fault code and your engine light is on, it could be due to a faulty transfer case motor, an open or shorted transfer case motor harness, or a poor electrical connection in the transfer case motor circuit. To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to examine the components as well.

How can a faulty transfer case motor lead to the engine light being on and what steps can I take to fix it?

If you notice that your engine light is on, it could be due to a faulty transfer case motor. This can happen if the transfer case motor harness is open or shorted, or if there is a poor electrical connection in the motor circuit. To fix this issue, you should first check the possible causes mentioned above. Then, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. Taking these steps can help resolve the problem and get your engine light back to normal.

What should I look for when inspecting the wiring harness and connectors related to the transfer case motor to resolve the P1891 fault code?

When dealing with the P1891 fault code related to the transfer case motor, it’s important to inspect the wiring harness and connectors. Start by visually examining the harness and connectors for any signs of damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. These issues can cause poor electrical connections and lead to the engine light being on. By checking and addressing these possible causes, you can resolve the P1891 fault code.

p1891 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Transfer Case Motor or issues with the wiring harness and connectors. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken or bent pins as well.

Scroll to Top