[SOLVED] P1734 Code: Fast Fix For Gear Control Issue

OBD code P1734 indicates a problem with the Speed Sensor in the Automatic Transmission Control Module.

Symptoms include the Engine Light being ON.

This issue is commonly caused by a faulty Speed Sensor, open/shorted harness, or poor electrical connection.

It’s crucial to inspect the wiring and connectors for damage.

A possible fix is to address the issues with the Speed Sensor circuit and connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle may experience harsh shifting or slipping in the transmission with fault code P1734.

  • Symptoms: Engine Light ON.
  • Possible harsh shifting from the transmission.
  • Difficulty shifting gears.
  • Rough or jerky acceleration.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

P1734 code typically indicates a problem with the hydraulic pressure sensor circuit in the transmission.

  • P1734 can be caused by a Faulty Speed Sensor.
  • A Speed Sensor harness that is open or shorted.
  • A Speed Sensor circuit with poor electrical connection.

Address the issue by inspecting the transmission control module and related wiring for faults.

  • To fix OBDII code P1734, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
  • Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Next, check the transmission fluid level and condition to ensure it is at the correct level and not burnt.
  • Perform a thorough inspection of the transmission solenoids and wiring for any issues.
  • Test the transmission control module (TCM) for proper operation and consider reprogramming or replacing it if necessary.
  • Finally, clear the fault codes and test drive the vehicle to verify that the issue has been resolved.

Diagnosing and repairing fault code P1734 typically involves inspecting and servicing the transmission components.

The cost to diagnose and fix OBD code P1734 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.

Costs depend on labor rates, shop fees, and the complexity of the transmission issue causing the code.

P1734 code relates to an issue with the 4th gear ratio in the transmission.

OBD code P1734 means a problem with the 4th gear ratio in an automatic transmission.

This code is triggered by the Transmission Control Module (TCM) when it detects that the actual gear ratio does not match the desired gear ratio for 4th gear.

This discrepancy can be caused by issues such as a faulty transmission solenoid, a slipping clutch, or internal transmission damage.

The TCM monitors input speed sensor signals and output speed sensor signals to determine the gear ratio, and when it detects a discrepancy, it sets code P1734.

P1734 code indicates a problem with the 4th gear pressure switch circuit in the transmission.

To diagnose and fix OBDII code P1734, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

Address any issues found during the inspection to resolve the P1734 fault code.

1. What does OBD code P1734 mean in a vehicle?

OBD code P1734 indicates a faulty Speed Sensor. Check sensor, harness, and connections for issues. Inspect wiring for damage or corrosion.

2. What are the common symptoms associated with OBD code P1734?

Common symptoms of OBD code P1734 include Engine Light ON, caused by a faulty Speed Sensor, open/shorted harness, or poor electrical connection. Inspect and repair affected components.

3. How can I diagnose and repair OBD code P1734 in my vehicle?

Diagnose and repair OBD code P1734 by checking the speed sensor, harness, and circuit for faults. Inspect wiring, connectors, and components for damage or corrosion.

 p1734 error fault code explained

If your transmission is slipping or shifting erratically and you see OBDII code P1734, it may be caused by a malfunctioning pressure control solenoid, low transmission fluid level, or a faulty transmission control module.

To address OBDII code P1734, check the transmission fluid level and condition, inspect the wiring harness and connectors for any damage, and test the pressure control solenoid for proper operation.

Consider replacing the pressure control solenoid if necessary.

Scroll to Top