The automobile fault code P1722 indicates a problem with the vehicle speed sensor. When this fault occurs, the engine light or service engine soon warning light will illuminate. The cause of this issue could be a faulty vehicle speed sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to ensure the proper functioning of your vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P1722 Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1722 fault code.
- The symptoms of the automobile fault code P1722 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1722?
The automobile fault code P1722 can be caused by a faulty vehicle speed sensor, an open or shorted vehicle speed sensor harness, or a poor electrical connection in the vehicle speed sensor circuit.
- The fault code P1722 can be caused by the following: a faulty vehicle speed sensor, an open or shorted vehicle speed sensor harness, and a poor electrical connection in the vehicle speed sensor circuit.
Fixing Code P1722: Simple Steps To Resolve The Issue
To fix the automobile fault code p1722, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1722, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1722 – Cost And Complexity Unveiled!
The automobile fault code P1722 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1722 Fault Code: Understanding The Transmission Speed Sensor Circuit Malfunction
The P1722 fault code indicates an issue with the estimated vehicle speed signal.
This signal is transmitted from the ABS actuator and electric unit to the Transmission Control Module (TCM) through the Control Area Network (CAN) communication line.
When this fault code appears, it means that there is a problem with the accuracy of the vehicle speed signal being received by the TCM.
This can lead to various issues with the transmission system, such as improper shifting or hesitation during acceleration. To fix this problem, it is important to first check the wiring and connections between the ABS actuator and electric unit and the TCM.
Any loose or damaged wires should be repaired or replaced.
If the wiring is in good condition, the next step is to inspect the ABS actuator and electric unit itself for any faults or malfunctions.
If necessary, the unit may need to be repaired or replaced to resolve the P1722 fault code and restore proper transmission functionality.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1722 could be the culprit. This code is often caused by a faulty vehicle speed sensor or issues with the vehicle speed sensor harness, such as an open or shorted circuit. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
To fix the P1722 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the vehicle speed sensor harness, which may be open, shorted, or have a poor electrical connection. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
When resolving the P1722 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.
Wrap Up
If your engine light is on and you’re experiencing issues with your vehicle’s speed, it could be due to a faulty vehicle speed sensor or a problem with the wiring harness or electrical connection. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion.
Check for broken or bent pins as well.
