The automobile fault code P16AB indicates a problem with the Intake Air Heater Temperature Sensor. This can cause the Engine Light to turn on, indicating a potential issue. The sensor may be faulty, or there could be an issue with the wiring harness or electrical connection.

To fix this, visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors. This repair is important as it can affect the performance of the engine. The difficulty level of this repair is moderate, and it can take approximately 1.0 hour to complete.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p16ab fault code.

  • The symptoms of the automobile fault code p16ab include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p16ab can be caused by a faulty intake air heater temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code p16ab can be caused by: a faulty intake air heater temperature sensor, an open or shorted intake air heater temperature sensor harness, and a poor electrical connection in the intake air heater temperature sensor circuit.

To fix the automobile fault code p16ab, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p16ab, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code p16ab has an estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for this type of repair.

The P16AB fault code refers to a problem with the intake air heater’s temperature sensor circuit. The intake air heater performs internal diagnostics for the temperature sensor circuit. If the voltage of the internal temperature sensor falls outside the calibrated threshold, the intake air heater sends a message to the Glow Plug Control Module (GPCM).

The GPCM then sends a message to the Engine Control Module (ECM) to set the appropriate Diagnostic Trouble Code (DTC). In this case, the P16AB code indicates that the intake air heater temperature sensor circuit has a high voltage.

What are the possible causes of the automobile fault code P16AB?

If you see the engine light on or the service engine soon warning light, the fault code P16AB could be the culprit. This code is often caused by a faulty intake air heater temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the P16AB fault code?

To fix the P16AB fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the Intake Air Heater Temperature Sensor or its circuit. Don’t forget to check the “Possible Causes” mentioned above for a comprehensive solution.

What should I look for when checking for damaged components and connector’s pins to resolve the P16AB fault code?

To resolve the P16AB fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection or an open or shorted circuit, leading to a faulty Intake Air Heater Temperature Sensor. By checking and addressing these possible causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p16ab error fault code explained

To fix the p16ab fault code, start by visually inspecting the wiring harness and connectors.

Look for any damage or corrosion. Check the intake air heater temperature sensor for any issues. Make sure the sensor’s circuit has a good electrical connection.

Look out for broken or bent pins on the connectors.

Scroll to Top