[SOLVED] P1684 Code – Battery Power Disconnected: Fix And Prevent Module Issues

Are you experiencing the automobile fault code P1684? This code can be a result of various issues such as a recently disconnected battery, low battery voltage, a malfunctioning charging system, or a faulty Transmission Control Module (TCM).

It can also occur if the TCM was replaced or disconnected, or if there is an open or shorted TCM harness or poor electrical connection. To fix this issue, start by visually inspecting the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

This repair typically takes around 1.0 hour. Remember to check the “Possible Causes” mentioned above to ensure a thorough diagnosis.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

Experiencing issues with your vehicle’s p1684 fault code? Look out for these common symptoms:

  • The symptoms of the automobile fault code P1684 include intermittent or complete loss of power, engine stalling or hesitation, difficulty starting the vehicle, the check engine light illuminating, and the vehicle going into “limp mode” where it operates at reduced power.

The automobile fault code p1684 can be caused by various factors, including a recently disconnected battery, low battery voltage, a malfunctioning charging system, and more.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

  • The fault code P1684 can be caused by various factors, including: battery recently disconnected, low battery voltage, malfunctioning charging system, replacement or disconnection of the Transmission Control Module (TCM), faulty TCM, open or shorted TCM harness, and poor electrical connection in the TCM circuit.

To fix the automobile fault code p1684, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P1684, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code P1684 can be diagnosed and fixed within an estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for this type of repair.

When you see the Engine Light ON or the Service Engine Soon Warning Light in your car, it could be indicating a fault code called p1684. This code is related to the battery being disconnected or the power being interrupted to the Engine Control Module (ECM).

It means that the ECM has lost its memory and needs to be reprogrammed.

This fault code is commonly seen after the battery has been replaced or disconnected. It is important to address this issue as it can affect the performance and efficiency of your vehicle.

What are the possible causes of the automobile fault code P1684?

If you’re seeing the fault code P1684 on your automobile, there are a few possible causes to consider. It could be due to a recently disconnected battery, low battery voltage, a malfunctioning charging system, or even a replaced or disconnected Transmission Control Module (TCM). Other potential causes include a faulty TCM, an open or shorted TCM harness, or a poor electrical connection in the TCM circuit. To fix this issue, start by visually inspecting the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I fix the P1684 fault code in my car?

If you’re dealing with the P1684 fault code in your car, there are a few potential causes to consider. It could be due to a recently disconnected battery, low battery voltage, a malfunctioning charging system, a replaced or disconnected Transmission Control Module (TCM), a faulty TCM, or an open or shorted TCM harness. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the “Possible Causes” mentioned above for further guidance.

What should I visually inspect and check for when troubleshooting the P1684 fault code?

When troubleshooting the P1684 fault code, there are several things you should visually inspect and check for. Start by checking if the battery was recently disconnected or if there is low battery voltage. Next, inspect the charging system for any malfunctions. If the Transmission Control Module (TCM) was replaced or disconnected, it could be a potential cause. Additionally, check for a faulty TCM or if the TCM harness is open or shorted. Lastly, ensure there are no poor electrical connections in the TCM circuit. Visually inspect the wiring harness and connectors for any damage, and look for broken, bent, pushed out, or corroded connector pins.

p1684 error fault code explained

If you’re experiencing the P1684 fault code, there are a few possible causes to consider. First, check if your battery was recently disconnected or if you have low battery voltage. It’s also worth investigating if your charging system is malfunctioning or if the Transmission Control Module (TCM) was replaced or disconnected.

Another potential cause could be a faulty TCM or an openshorted TCM harness.

To fix the issue, visually inspect the wiring harness and connectors, looking for any damage or broken, bent, pushed out, or corroded pins.

Scroll to Top