[SOLVED] P1554 Code – Fix Battery Current Sensor Performance Issue Now!

The automobile fault code P1554 indicates a problem with the Battery Current Sensor.

When this fault code appears, you may notice that the Engine Light is ON or the Service Engine Soon Warning Light is illuminated. The cause of this issue could be a faulty Battery Current Sensor, an open or shorted harness, or a poor electrical connection in the Battery Current Sensor circuit. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors. The repair for this fault code is estimated to take around 1.0 hour.

To interpret the fault code, check the “Possible Causes” listed above and follow the recommended steps for inspection and repair.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1554 fault code.

  • The symptoms of the automobile fault code p1554 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1554 can be caused by a faulty battery current sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

  • The fault code P1554 can be caused by the following: a faulty battery current sensor, an open or shorted battery current sensor harness, and a poor electrical connection in the battery current sensor circuit.

To fix fault code p1554, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1554, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1554 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.

The P1554 fault code refers to the Battery Current Sensor Performa. This code is related to the power generation voltage variable control system in your automobile.

The purpose of this system is to reduce fuel consumption by decreasing the engine load caused by the generator’s power generation. To achieve this, a battery current sensor is installed on the negative terminal of the battery cable.

This sensor measures the charging and discharging current of the battery. The Engine Control Module (ECM) uses the sensor signal to determine whether or not the power generation voltage variable control should be performed.

When the ECM decides to perform the power generation voltage variable control, it calculates the target power generation voltage based on the sensor signal. The ECM then sends this calculated value as the power generation command to the Intelligent Power Distribution Module Engine Room (IPDM ER). In summary, the P1554 fault code indicates an issue with the battery current sensor, which is crucial for the proper functioning of the power generation voltage variable control system in your automobile.

What are the possible causes of fault code P1554 and how can I visually inspect them?

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the fault code P1554 could be the culprit. This code is often caused by a faulty Battery Current Sensor, an open or shorted harness, or a poor electrical connection in the Battery Current Sensor circuit. To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Taking these steps can help you identify and fix the issue.

How can a faulty battery current sensor lead to the engine light being on and what steps can I take to fix it?

If you notice that your engine light is on or you see a service engine soon warning light, it could be due to a faulty battery current sensor. This can happen if the sensor’s harness is open or shorted, or if there is a poor electrical connection in the sensor circuit. To fix this issue, start by checking the possible causes mentioned earlier. Take a close look at the wiring harness and connectors, making sure there are no visible damages. Also, check for any broken, bent, pushed out, or corroded pins in the connectors.

What should I look for when inspecting the wiring harness and connectors related to the battery current sensor to resolve fault code P1554?

When dealing with fault code P1554, it’s important to inspect the wiring harness and connectors related to the battery current sensor. This can help resolve the issue and get rid of that pesky engine light or service engine soon warning light. The cause of this fault code could be a faulty battery current sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to also check the possible causes listed above.

p1554 error fault code explained

If your engine light is on, it could be due to a faulty battery current sensor or issues with the sensor’s harness and electrical connection. To fix this, visually inspect the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top