The automobile fault code P1552 indicates a problem with the Battery Current Sensor. When this fault code appears, you may notice that the Engine Light or Service Engine Soon Warning Light is illuminated.
The cause of this issue could be a faulty Battery Current Sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.
The repair for this fault code typically takes around 1.0 hour.
By addressing this issue promptly, you can ensure the proper functioning of your vehicle’s battery current sensor.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
Unveiling The Mystery: Symptoms Of Fault Code P1552 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1552 fault code.
- The symptoms of the automobile fault code p1552 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1552?
The automobile fault code p1552 can be caused by a faulty battery current sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
- Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
- Works anywhere, even with limited connectivity, making it highly versatile.
- Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
- Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
- Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
- Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
- The fault code P1552 can be caused by the following: a faulty battery current sensor, an open or shorted battery current sensor harness, and a poor electrical connection in the battery current sensor circuit.
Fixing Code P1552: Simple Steps To Resolve The Issue
To fix the automobile fault code p1552, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1552, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1552 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p1552 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P1552 Fault Code: Understanding The Description And Troubleshooting Steps
The P1552 fault code refers to a problem with the battery current sensor circuit.
This sensor is located on the battery cable at the negative terminal and is responsible for measuring the charging and discharging current of the battery. The Engine Control Module (ECM) uses the sensor signal to determine whether or not to perform power generation voltage variable control. When the power generation voltage variable control is activated, the ECM calculates the target power generation voltage based on the sensor signal.
The ECM then sends this calculated value as the power generation command to the Intelligent Power Distribution Module Engine Room (IPDM ER). In summary, the P1552 fault code indicates an issue with the battery current sensor circuit, which can affect the power generation voltage control and ultimately impact fuel consumption. It is important to address this issue promptly to ensure optimal performance and efficiency of the vehicle.
FAQ
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the fault code P1552 could be the culprit. This code is often caused by a faulty Battery Current Sensor, an open or shorted harness, or a poor electrical connection in the Battery Current Sensor circuit. To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Taking these steps can help you identify and fix the issue.
When the engine light is on, it could be due to a faulty battery current sensor. This sensor measures the current flowing in and out of the battery. If the sensor is faulty or if there is an issue with the sensor’s wiring, it can trigger the engine light. To fix this, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors.
To fix fault code P1552 and ensure a proper electrical connection, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, visually inspecting for any damage. Pay attention to broken, bent, pushed out, or corroded pins in the connectors. By addressing these issues, you can resolve the fault code and establish a reliable electrical connection.
Wrap Up
If your engine light is on and you’re seeing the P1552 fault code, it could be due to a faulty battery current sensor or issues with the sensor’s wiring. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins as well.