[SOLVED] P150B Code: Fixing Intermittent Transmission Output Speed Sensor Circuit

The automobile fault code P150B indicates a problem with the Transmission Output Speed Sensor. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on.

The cause of this fault code could be a faulty sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p150b fault code.

  • The symptoms of the automobile fault code P150B include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

The automobile fault code p150b can be caused by a faulty transmission output speed sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code P150B can be caused by the following: a faulty transmission output speed sensor, an open or shorted harness for the transmission output speed sensor, and a poor electrical connection in the transmission output speed sensor circuit.

To fix the automobile fault code p150b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P150B, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p150b based on the repair time are as follows: 1. Repair Time: The estimated repair time for fixing the fault code p150b is 1.0 hour. 2. Labor Charges: Most auto repair shops charge between $75 and $150 per hour for labor. These factors play a significant role in determining the overall cost of diagnosing and fixing the p150b fault code.

The P150B fault code refers to a problem with the Transmission Output Speed Sensor Circuit. This sensor, also known as the Vehicle Speed Sensor or Output Shaft Speed Sensor, generates an AC voltage as the rotor passes through its magnetic field.

The Transmission Control Module (TCM) then converts this AC voltage into a vehicle speed signal, which is crucial for determining shift timing and Torque Converter Clutch (TCC) scheduling.

Additionally, the TCM provides a Replicated Transmission Output Speed Signal (RTOSS) to the Engine Control Module (ECM).

However, the P150B code indicates an intermittent issue with this circuit.

What are the possible causes for the automobile fault code P150B?

If you see the engine light or service engine soon warning light on, the fault code P150B could be the culprit. This code is often caused by a faulty transmission output speed sensor or issues with the sensor’s wiring harness. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Additionally, check for broken, bent, pushed out, or corroded pins in the connectors. Taking these steps can help you identify and resolve the issue.

How can I visually inspect the wiring harness and connectors to fix the P150B fault code?

To fix the P150B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if the connector’s pins are broken, bent, pushed out, or corroded. This can help identify any issues with the Transmission Output Speed Sensor harness, which may be open, shorted, or have a poor electrical connection. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

What should I look for when checking for damaged components or corroded connector pins to resolve the P150B fault code?

When resolving the P150B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit. By checking for these specific problems, you can effectively address the cause of the fault code and resolve the issue.

p150b error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Transmission Output Speed Sensor or issues with the sensor’s harness or circuit connection.

To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top