The automobile fault code P142E indicates a problem with the Exhaust Gas Recirculation (EGR) Sensor ‘D’. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty EGR Sensor ‘D’, an open or shorted harness, or a poor electrical connection in the EGR Sensor ‘D’ circuit.
To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Mystery: Symptoms Of Fault Code P142E Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p142e fault code.
- The symptoms of the automobile fault code P142E include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P142E?
The automobile fault code p142e can be caused by a faulty Exhaust Gas Recirculation Sensor ‘D’, an open or shorted harness, or a poor electrical connection in the circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P142E can be caused by a faulty Exhaust Gas Recirculation Sensor ‘D’, an open or shorted harness for the Exhaust Gas Recirculation Sensor ‘D’, or a poor electrical connection in the circuit of the Exhaust Gas Recirculation Sensor ‘D’.
Fixing Code P142E: Simple Steps To Resolve The Fault
To fix the automobile fault code p142e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P142E, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P142E – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p142e are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p142e fault code.
P142E Fault Code: Understanding The Description And Troubleshooting Tips
The P142E fault code is related to the Exhaust Gas Recirculation (EGR) system in your automobile. The Powertrain Control Module (PCM) keeps an eye on the EGR Sensor ‘D’ and triggers this code when the sensor’s readings are not within the factory specifications. Specifically, the P142E code indicates that there is a high circuit voltage detected in the EGR Sensor ‘D’.
When this fault code appears, it means that there is a potential issue with the EGR system in your vehicle. The EGR system is responsible for recirculating a portion of the exhaust gases back into the engine, which helps reduce emissions and improve fuel efficiency. However, if the EGR Sensor ‘D’ is not functioning properly and is sending high voltage signals, it can disrupt the overall performance of the EGR system.
To resolve the P142E fault code, it is recommended to have a professional mechanic or technician diagnose the exact cause of the high circuit voltage in the EGR Sensor ‘D’.
They will use specialized tools and equipment to pinpoint the problem, which could range from a faulty sensor to a wiring issue.
Once the root cause is identified, the necessary repairs or replacements can be made to restore the proper functioning of the EGR system and clear the fault code.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P142E could be the culprit. This code is often caused by a faulty Exhaust Gas Recirculation (EGR) Sensor ‘D’, an open or shorted EGR Sensor ‘D’ harness, or a poor electrical connection in the EGR Sensor ‘D’ circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
To visually inspect the wiring harness and connectors related to the Exhaust Gas Recirculation Sensor ‘D’, start by checking for the symptom of the Engine Light ON or Service Engine Soon Warning Light. The cause could be a faulty sensor, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for any damaged components. Look out for broken, bent, pushed out, or corroded pins on the connectors. This will help identify and resolve the problem.
When troubleshooting the fault code P142E, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Exhaust Gas Recirculation Sensor ‘D’. By checking for these specific problems, you can effectively fix the fault code and prevent further engine issues.
Wrap Up
If your engine light is on or you see a service engine soon warning, it could be due to a faulty Exhaust Gas Recirculation (EGR) Sensor ‘D’.
To fix this issue, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
