The automobile fault code P1358 indicates a problem with the pick-up coil or crankshaft position sensor, as well as a faulty ignition control module. The most common symptom is the engine light being illuminated or the service engine soon warning light appearing. To fix this issue, it is important to visually inspect the wiring harness and connectors for any damage.
Look out for broken, bent, pushed out, or corroded connector pins.
The repair time for this fault code is estimated to be around 1.0. It is crucial to address this issue promptly to prevent further damage to the vehicle’s engine.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Mystery: Symptoms Of Fault Code P1358 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1358 fault code.
- The symptoms of the automobile fault code P1358 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1358?
The automobile fault code p1358 can be caused by a faulty pick-up coil or crankshaft position sensor, as well as a faulty ignition control module.
- The fault code P1358 can be caused by a faulty pick-up coil or crankshaft position sensor.
- It can also be caused by a faulty ignition control module.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P1358: Simple Steps To Resolve The Issue!
To fix the automobile fault code p1358, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1358, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1358 Fixing Cost And Complexity Unveiled!
The automobile fault code P1358 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1358 Fault Code: Understanding The Ignition Control Module Circuit Malfunction
The P1358 fault code indicates that the ignition diagnostic monitor signal is out of the self-test range. This code is a generic description, and the specific description may vary depending on the make and model of your vehicle.
Unfortunately, we do not have any additional information about this particular code at the moment.
If you have any questions or need further assistance, please feel free to ask in the comments section below.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1358 could be the culprit. This code is often caused by a faulty pick-up coil or crankshaft position sensor, as well as a faulty ignition control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.
If you’re dealing with the P1358 fault code and your engine light is on, it’s time to take action. The most common causes are a faulty pick-up coil or crankshaft position sensor, as well as a faulty ignition control module. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the problem quickly.
When resolving the P1358 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause the engine light to turn on. By addressing these potential causes, such as a faulty pick-up coil or crankshaft position sensor, or a faulty ignition control module, you can effectively fix the problem.
Wrap Up
If your engine light is on and you’re seeing the P1358 fault code, it could be due to a faulty pick-up coil or crankshaft position sensor, or a faulty ignition control module. To fix this issue, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins.
