[SOLVED] P1353 Code: Fix Misfire Cylinder 6 With Fuel Cut-Off For Smooth Performance!

If you’ve noticed that your engine light is on or you’ve received a service engine soon warning, it’s important to understand what the fault code P1353 means.

This code is typically associated with a few possible causes, including a faulty spark plug, ignition coil, intake vacuum leak, camshaft position sensor, or poor electrical connection in the ignition coil circuit.

To fix this issue, start by visually inspecting the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins on the connectors. This repair should take around 1.0 hour.

By addressing this fault code promptly, you can ensure your vehicle is running smoothly and avoid any potential complications down the road.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1353 fault code.

  • The symptoms of the automobile fault code P1353 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

The automobile fault code p1353 can be caused by a faulty spark plug, ignition coil, intake vacuum leak, camshaft position sensor, or poor electrical connection.

  • The fault code P1353 can be caused by a faulty spark plug, a faulty ignition coil, an intake vacuum leak, a faulty camshaft position sensor, an open or shorted ignition coil harness, or a poor electrical connection in the ignition coil circuit.

To fix the p1353 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1353, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code P1353 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1353 fault code indicates a misfire in cylinder 6 of the engine with fuel cut-off. This fault code is part of the Engine Control Module’s (ECM) monitoring system, which is required by CARBOBD regulations. The ECM detects misfires and identifies the specific cylinder and severity of the event.

To determine misfires, the ECM monitors the crankshaft for acceleration losses during firing segments of each cylinder. The calculation is based on the differences in the period duration of individual increment gear segments.

If the expected period duration exceeds the permissible value, a misfire fault for cylinder 6 is stored in the ECM’s fault memory. Depending on the measured misfire rate, the control unit may illuminate the Service Engine Soon light, cut off fuel to cylinder 6, and switch lambda operation to open-loop. The severity of the misfire is weighted to determine if it is emissions relevant or catalyst damaging.

In summary, the P1353 fault code indicates a misfire in cylinder 6 with fuel cut-off, which is detected and monitored by the ECM to ensure compliance with emissions regulations and protect the engine’s catalyst.

What are the possible causes of the automobile fault code p1353?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1353 could be the culprit. This code can be caused by a variety of issues, including faulty spark plugs, a faulty ignition coil, an intake vacuum leak, a faulty camshaft position sensor, or poor electrical connections in the ignition coil circuit. To fix this, start by visually inspecting the wiring harness and connectors, checking for any damage or corrosion. Also, be sure to look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p1353 fault code?

If you’re dealing with the p1353 fault code and your engine light is on, there are a few things you can do to fix it. Start by checking for possible causes like a faulty spark plug, ignition coil, intake vacuum leak, or camshaft position sensor. Then, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. This simple step can help you identify and resolve the issue.

What should I look for when checking for damaged components or corroded connector pins to resolve the p1353 fault code?

When resolving the p1353 fault code, it is important to check for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. By doing so, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.

p1353 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the issue could be a faulty spark plug, ignition coil, intake vacuum leak, or camshaft position sensor. To fix it, check the possible causes mentioned above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

Scroll to Top