The automobile fault code P1350 indicates a problem with the Ignition Control Module. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Ignition Control Module, an open or shorted harness, or a poor electrical connection in the Ignition Control Module circuit.
To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour. By addressing this fault code promptly, you can ensure the proper functioning of your vehicle’s ignition system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Unveiling The Mystery: Symptoms Of Fault Code P1350 Revealed!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1350 fault code.
- The symptoms of the automobile fault code P1350 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1350?
The automobile fault code p1350 can be caused by a faulty Ignition Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P1350 can be caused by: a faulty Ignition Control Module, an open or shorted Ignition Control Module harness, and a poor electrical connection in the Ignition Control Module circuit.
Fixing Code P1350: Simple Steps To Solve The Issue Fast!
To fix the p1350 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1350, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P1350 Fixing Cost And Complexity Unveiled!
The automobile fault code P1350 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1350 Fault Code: Understanding The Ignition Control Circuit Malfunction
The P1350 fault code refers to a problem with the Ignition Control System in your automobile. The Ignition Control Module (ICM) has its own power and ground circuits, and it communicates with the Powertrain Control Module (PCM) through various circuits. These circuits include the ignition control timing signal, IC timing control, low resolution engine speed signal, medium resolution engine signal, camshaft position signal, and low reference.
The ICM sends 3X signals to the PCM and controls the timing advance during engine cranking. Once the PCM receives the second 3X signal and applies 5 volts to the ignition control timing signal circuit, the timing advance shifts to PCM control. During engine cranking, the ICM monitors the CKP sync signal, which is passed from the CKP sensor to the ICM on the CKP sensor 2 signal circuit.
The CKP sync signal helps determine the correct cylinder pair and initiate the ignition coil firing sequence.
The 18X reference pulses, also passed from the CKP sensor to the ICM on the CKP sensor 1 circuit, are used for fuel injection and ignition control. After receiving both signals, the ICM passes the 18X and 3X reference signals to the PCM. The CMP and CKP sensors share a 12-volt reference and low reference circuit.
The CKP sensor includes a 12-volt reference, low reference, CKP sensor 1 signal, and CKP sensor 2 signal. If you are experiencing the P1350 fault code, it indicates an issue with the Ignition Control System in your vehicle.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1350 could be the culprit. This code is often caused by a faulty ignition control module, an open or shorted harness, or poor electrical connections in the ignition control module circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to check the possible causes listed above for further troubleshooting.
If you’re dealing with the P1350 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Ignition Control Module or issues with the harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the problem. Don’t delay, get to work and get your engine back in top shape.
When resolving the P1350 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.
Wrap Up
If your engine light is on, it could be due to a faulty Ignition Control Module or issues with the module’s harness or electrical connection. To fix this, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
