Are you experiencing engine troubles? The P1345 fault code might be the culprit. When this code appears, you’ll notice the engine light or service engine soon warning light illuminated.
Starting the engine becomes a challenge, and you might even experience stalling while driving. The cause of this issue could be related to the engine’s mechanical condition, such as the valve timing being off.
Loose cam or crank sensors, as well as faulty camshaft or crankshaft position sensors, could also be to blame. To fix this problem, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins.
This repair is of moderate importance and difficulty, with an estimated time of 1.0. Don’t worry, we’ll guide you through the process.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
P1345 Fault Code Symptoms: Uncover The Telltale Signs Of Trouble!
If you’re experiencing an illuminated engine light, difficulty starting your engine, or sudden stalling while driving, you may be dealing with the p1345 fault code.
- The symptoms of the automobile fault code p1345 include: Engine Light ON (or Service Engine Soon Warning Light), engine hard to start, and engine stall while driving.
Unraveling The Mystery: What Causes Fault Code P1345?
The fault code p1345 can be caused by engine mechanical issues, loose cam or crank sensors, or faulty position sensors.
- Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
- Works anywhere, even with limited connectivity, making it highly versatile.
- Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
- Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
- Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
- Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
- The fault code P1345 can be caused by the following: engine mechanical condition with valve timing off, loose cam sensor or crank sensor on their mounting, faulty camshaft position sensor, and faulty crankshaft position sensor.
Fixing Code P1345: Simple Steps To Solve The Issue
To fix the p1345 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1345, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing the issue is estimated to take approximately 1.0 hour.
Cracking The Code: P1345 Fixing Cost And Complexity Unveiled!
The automobile fault code P1345 can be diagnosed and fixed within an estimated repair time of 1.0 hour. Most auto repair shops typically charge between $75 and $150 per hour for this service.
P1345 Fault Code: Understanding The Cause And Solution
The P1345 fault code indicates a problem with the correlation between the crankshaft position and the camshaft position in the engine. The Crankshaft Position (CKP) sensor is a magnet generator that produces seven pulses for each revolution of the crankshaft. The Camshaft Position (CMP) sensor provides six signal pulses every camshaft revolution. These signals are used by the Powertrain Control Module (PCM) to synchronize the coil firing sequence with the crankshaft position and control the phasing of the camshaft at the correct value. The P1345 code suggests that there is an issue with the relationship between the CKP and CMP signals.
This can affect the engine’s performance, including the identification of the compression stroke of each cylinder and sequential fuel injection. To fix this issue, the CKP and CMP sensors should be inspected for any damage or misalignment.
The wiring and connections to these sensors should also be checked for any faults.
If necessary, the sensors or their related components may need to be replaced to resolve the P1345 fault code.
FAQ
If you’re experiencing the fault code P1345 in your automobile, you may notice that the engine light is on or the service engine soon warning light is illuminated. Additionally, you might have difficulty starting the engine or it may stall while driving. These symptoms could be caused by a few different factors. One possibility is that the engine’s valve timing is off, or it could be due to loose cam or crank sensors. Another potential cause is a faulty camshaft or crankshaft position sensor. To fix the issue, it’s important to visually inspect the wiring harness and connectors, checking for any damage or corrosion. It’s also a good idea to look for any broken, bent, pushed out, or corroded pins on the connectors.
To fix fault code P1345, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the engine’s mechanical condition, loose cam or crank sensors, or faulty camshaft or crankshaft position sensors. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
To resolve fault code P1345, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause symptoms such as the engine light being on, difficulty starting the engine, and engine stalling while driving. By addressing these possible causes, you can fix the problem and ensure smooth engine performance.
Wrap Up
If you’re experiencing a hard start or engine stalling while driving, along with the engine light being on, you might be dealing with fault code P1345. This code is usually caused by issues with the engine’s valve timing, loose cam or crank sensors, or faulty position sensors. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken or bent pins as well.