[SOLVED] P1316 Code: Troubleshooting And Fixing Injector Driver Module Issues

The automobile fault code P1316 indicates a problem with the Injector Driver Module (IDM) in the engine.

This can cause the Engine Light or Service Engine Soon Warning Light to turn on. The possible causes include a faulty IDM relay, a faulty IDM, an open or shorted IDM harness, a poor electrical connection in the IDM circuit, or a faulty Powertrain Control Module (PCM).

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the engine.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1316 fault code.

  • The symptoms of the automobile fault code p1316 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1316 can be caused by a faulty Injector Driver Module (IDM) Relay, Injector Driver Module, Injector Driver Module harness, Injector Driver Module circuit, or a faulty Powertrain Control Module (PCM).

  • The fault code P1316 can be caused by the following: a faulty Injector Driver Module (IDM) Relay, a faulty Injector Driver Module, an open or shorted Injector Driver Module harness, a poor electrical connection in the Injector Driver Module circuit, or a faulty Powertrain Control Module (PCM).

To fix the p1316 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1316, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1316 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p1316 fault code.

The P1316 fault code refers to the Injector Driver Module (IDM) in your automobile. The IDM is responsible for providing an EF output signal to the Powertrain Control Module (PCM) to confirm the correct timing and duration of the Fuel Delivery Command Signal (FDCS). It also sends diagnostic information about the IDM and electrical circuits of the injectors to the PCM.

When the P1316 code is detected, it means that there are codes stored in the IDM.

This code helps identify issues related to the IDM and injector circuits, allowing for proper diagnosis and repair.

What are the possible causes of the automobile fault code P1316?

If you see the engine light or service engine soon warning light on, the fault code P1316 could be the culprit. This code is often caused by a faulty Injector Driver Module (IDM) relay, a faulty Injector Driver Module itself, an open or shorted Injector Driver Module harness, or a poor electrical connection in the Injector Driver Module circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken pins. It’s also important to check for any damaged components and ensure that the connectors are not bent, pushed out, or corroded.

How can I visually inspect the wiring harness and connectors to fix the P1316 fault code?

If you’re dealing with the P1316 fault code and notice that your engine light is on, it’s time to take action. The possible causes for this issue include a faulty Injector Driver Module (IDM) Relay, a faulty Injector Driver Module, an open or shorted Injector Driver Module harness, a poor electrical connection in the Injector Driver Module circuit, or a faulty Powertrain Control Module (PCM). To fix this problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. This step is crucial in identifying and resolving the issue at hand.

What should I look for when checking for damaged components and connector’s pins to resolve the P1316 fault code?

When resolving the P1316 fault code, start by checking for damaged components and connector’s pins. Visually inspect the related wiring harness and connectors, looking for any signs of damage such as broken, bent, pushed out, or corroded pins. This can help identify any issues with the Injector Driver Module (IDM) Relay, Injector Driver Module, Injector Driver Module harness, or poor electrical connections in the circuit. Don’t forget to also check the Powertrain Control Module (PCM) for any faults.

p1316 error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty Injector Driver Module (IDM) Relay, Injector Driver Module, or a problem with the wiring harness or connectors. To fix it, visually inspect the wiring and connectors for any damage, and check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top