The automobile fault code P1307 indicates a problem with the Acceleration Sensor.
The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty Acceleration Sensor, an open or shorted Acceleration Sensor harness, or a poor electrical connection in the Acceleration Sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0.
It is important to address this fault code promptly to ensure optimal performance and avoid further damage to the vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Uncover The Hidden Symptoms Of Fault Code P1307: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1307 fault code.
- The symptoms of the automobile fault code P1307 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1307?
The automobile fault code P1307 can be caused by a faulty acceleration sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.
- The fault code P1307 can be caused by the following: a faulty acceleration sensor, an open or shorted acceleration sensor harness, and a poor electrical connection in the acceleration sensor circuit.
Fixing Code P1307: Simple Steps To Resolve The Issue!
To fix the p1307 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1307, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1307 – Cost And Complexity Unveiled!
The automobile fault code P1307 can be diagnosed and fixed within an estimated repair time of 1.0 hour.
Most auto repair shops typically charge between $75 and $150 per hour for their services.
P1307: Unraveling The Mystery Behind This Automobile Fault Code
The P1307 fault code refers to the Accelerator Sensor RangePerformance. This code is related to the Chassis acceleration (Rough Road) sensor, which detects the vertical acceleration of the vehicle.
The sensor signal is used by the ECM (Engine Control Module) to determine the degree of vertical movement, particularly on bumpy roads. The ECM uses this signal to differentiate between uneven engine running and actual misfiring. The P1307 code indicates that there is an issue with the range or performance of the accelerator sensor.
It is important to address this issue promptly to ensure smooth engine operation and optimal vehicle performance.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1307 could be the culprit. This code is often caused by a faulty acceleration sensor or issues with the sensor’s harness, such as it being open or shorted. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check if any components are broken or bent. It’s also important to check the connector’s pins for any signs of being pushed out or corroded.
If you’re dealing with the P1307 fault code and notice that your engine light is on, it’s time to take action. The most common cause of this issue is a faulty acceleration sensor or a problem with the acceleration sensor harness. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the issue.
When resolving the P1307 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Acceleration Sensor harness, which may be open, shorted, or have a poor electrical connection. Taking these steps will help you diagnose and fix the problem efficiently.
![p1307 error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/07/P1307-error-fault-code.jpg)
Wrap Up
If your engine light is on and you’re seeing the P1307 fault code, it could be due to a faulty acceleration sensor or issues with the sensor’s harness and electrical connection. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken or bent pins on the connectors as well.