The automobile fault code P129D indicates a problem with the Fuel Pump Power Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. This fault code can be caused by a faulty Fuel Pump Power Control Module, an open or shorted harness, or poor electrical connections.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this issue is estimated to be around 1.0.

It is important to address this problem promptly to ensure proper functioning of the fuel pump.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p129d fault code.

  • The symptoms of the automobile fault code P129D include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p129d can be caused by a faulty Fuel Pump Power Control Module, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code P129D can be caused by: a faulty Fuel Pump Power Control Module, an open or shorted harness of the Fuel Pump Power Control Module, and a poor electrical connection in the circuit of the Fuel Pump Power Control Module.

To fix the automobile fault code p129d, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p129d, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p129d are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

The P129D fault code refers to a problem with the Fuel Pump Power Control Module. This module is responsible for monitoring the ignition voltage circuit in the vehicle to ensure it is operating within the normal range. When the voltage falls below a calibrated value for 1 second, the Diagnostic Trouble Code (DTC) is triggered.

In simpler terms, the P129D code indicates that there is a low voltage issue with the ignition switch circuit of the Fuel Pump Driver Control Module. This can potentially affect the performance of the fuel pump, which is responsible for delivering fuel to the engine.

If you encounter this fault code, it is important to have it addressed promptly. Ignoring the issue can lead to problems with fuel delivery, which can result in poor engine performance or even engine stalling. A qualified mechanic will be able to diagnose the exact cause of the low voltage and make the necessary repairs to ensure your vehicle is running smoothly and efficiently.

What are the possible causes of the automobile fault code P129D?

If you see the engine light or service engine soon warning light on, the fault code P129D could be the culprit. This code is often caused by a faulty fuel pump power control module or issues with the module’s harness, such as an open or shorted circuit. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins on the connectors.

How can I visually inspect the wiring harness and connectors to fix the P129D fault code?

If you’re dealing with the P129D fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Fuel Pump Power Control Module or issues with the harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step could be the key to resolving the issue and getting your engine running smoothly again. Don’t delay, check those connections now!

What should I look for when checking for damaged components and connector’s pins to resolve the P129D fault code?

When resolving the P129D fault code, start by checking for damaged components and connector’s pins. Visually inspect the related wiring harness and connectors, looking for any signs of damage such as broken, bent, pushed out, or corroded pins. This can help identify if the issue lies with a faulty fuel pump power control module or if there is an open or shorted circuit. By thoroughly examining these areas, you can pinpoint the cause of the problem and proceed with the necessary fix.

p129d error fault code explained

To fix the P129D fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

This will help identify any issues with the Fuel Pump Power Control Module. Take action now to resolve the Engine Light ON warning.

Scroll to Top