The automobile fault code P129B indicates a problem with the Absolute Pressure Sensor.

When this fault occurs, the Engine Light or Service Engine Soon Warning Light will illuminate. The cause of this issue could be a faulty Absolute Pressure Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit. To fix this problem, you should visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour. It is important to address this fault code promptly to ensure optimal performance and avoid further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p129b fault code.

  • The symptoms of the automobile fault code P129B include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p129b can be caused by a faulty Absolute Pressure Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit.

  • The fault code P129B can be caused by the following: a faulty Absolute Pressure Sensor, an open or shorted harness for the Absolute Pressure Sensor, and a poor electrical connection in the Absolute Pressure Sensor circuit.

To fix the automobile fault code p129b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p129b, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p129b are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p129b fault code.

The P129B fault code refers to an issue with the Absolute Pressure Sensor in the intake pipe of the engine. The Engine Control Module (ECM) constantly monitors this sensor to ensure it is functioning within the factory specifications.

When the ECM detects that the Absolute Pressure Sensor is not operating correctly, it triggers the P129B fault code. This code indicates an implausible overrun pressure in the intake pipe. In simpler terms, the P129B fault code means that there is a problem with the sensor that measures the pressure in the intake pipe of the engine.

This sensor is important for the engine’s performance and efficiency. When the sensor is not working properly, it can lead to incorrect pressure readings, which can affect the engine’s performance. The P129B fault code alerts the driver or mechanic to the issue so that it can be diagnosed and fixed promptly.

What are the possible causes of the automobile fault code P129b?

If you see the engine light or service engine soon warning light on, the fault code P129b could be the culprit. This code is often caused by a faulty absolute pressure sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check if any components are broken, bent, or pushed out. It’s important to ensure that the connector’s pins are not corroded as well.

How can I visually inspect the wiring harness and connectors to fix the P129b fault code?

If you’re dealing with the P129b fault code and your engine light is on, it’s time to take action. The most likely cause is a faulty Absolute Pressure Sensor or issues with its wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the issue.

What should I look for when checking for damaged components and connector’s pins to resolve the P129b fault code?

When resolving the P129b fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Absolute Pressure Sensor or its circuit connections. This step is crucial in fixing the problem and getting rid of the Engine Light or Service Engine Soon Warning Light.

p129b error fault code explained

If your engine light is on and you’re experiencing issues, it could be due to a faulty Absolute Pressure Sensor or a problem with the sensor’s wiring.

To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top