The automobile fault code P1297 indicates a problem with the Manifold Absolute Pressure (MAP) Sensor.

This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty MAP sensor, a restricted MAP sensor, an open or shorted MAP sensor harness, poor electrical connection in the MAP sensor circuit, or a faulty Engine Control Module (ECM).

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1297 fault code.

  • The symptoms of the automobile fault code P1297 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code P1297 can be caused by a faulty MAP sensor, restricted MAP sensor, open or shorted MAP sensor harness, poor electrical connection in the MAP sensor circuit, or a faulty ECM.

  • The fault code P1297 can be caused by a faulty Manifold Absolute Pressure (MAP) Sensor, a restricted Manifold Absolute Pressure Sensor, an open or shorted harness for the Manifold Absolute Pressure Sensor, a poor electrical connection in the Manifold Absolute Pressure Sensor circuit, or a faulty Engine Control Module (ECM).

To fix the p1297 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P1297, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code P1297 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P1297 fault code is triggered when the Engine Control Module (ECM) detects no change in the voltage of the Manifold Absolute Pressure (MAP) sensor.

This means that there is a too-small difference between the Barometric Pressure and the manifold vacuum for a period of more than 8.80 seconds. The P1297 code indicates a problem with the MAP sensor voltage, which can affect the engine’s performance and fuel efficiency.

It is important to address this issue promptly to prevent further damage to the vehicle and ensure optimal engine operation.

What are the possible causes of the automobile fault code P1297?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1297 could be the culprit. This code is often caused by a faulty manifold absolute pressure (MAP) sensor, a restricted MAP sensor, an open or shorted MAP sensor harness, or a poor electrical connection in the MAP sensor circuit. It’s also possible that the engine control module (ECM) is to blame. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the P1297 fault code?

If you’re dealing with the P1297 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Manifold Absolute Pressure (MAP) Sensor, a restricted sensor, or a poor electrical connection. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or corroded pins. Don’t forget to check for any components that may be bent or pushed out of place. Take a close look and get to the bottom of this problem.

What should I look for when checking for damaged components or corroded connector pins to resolve the P1297 fault code?

When resolving the P1297 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.

p1297 error fault code explained

If your engine light is on and you’re seeing the P1297 fault code, it could be due to a faulty Manifold Absolute Pressure (MAP) sensor, a restricted MAP sensor, or issues with the sensor’s wiring harness or electrical connection.

To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.

Scroll to Top