Are you experiencing the automobile fault code P1288? This code indicates a problem with the Cylinder Head Temperature (CHT) sensor.

Symptoms may include an overheating engine or a low coolant level. The cause could be a faulty thermostat, an overheated engine, a low coolant level, or issues with the CHT sensor or its wiring.

To fix this issue, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors.

This repair is of moderate importance and difficulty, with an estimated repair time of 1.0. Make sure to address this issue promptly to prevent further damage to your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing engine overheating, loss of power, and potential coolant leaks are common symptoms of the automobile fault code: p1288.

  • The fault code P1288 can manifest in several symptoms, including: engine misfires, reduced engine power, rough idling, stalling, difficulty starting the vehicle, poor fuel efficiency, and an illuminated check engine light.

The automobile fault code P1288 can be caused by various factors, including a wrong thermostat, engine overheating, low engine coolant level, faulty Cylinder Head Temperature (CHT) sensor, open or shorted CHT sensor harness, and poor electrical connection in the CHT sensor circuit.

  • The fault code P1288 can be caused by: a wrong thermostat, engine overheating, low engine coolant level, a faulty Cylinder Head Temperature (CHT) sensor, an open or shorted Cylinder Head Temperature sensor harness, and a poor electrical connection in the Cylinder Head Temperature sensor circuit.

To fix the automobile fault code p1288, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P1288, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code P1288 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a fault code of p1288.

This code specifically relates to the engine coolant temperature sensor.

The sensor is responsible for monitoring the temperature of the engine coolant and sending this information to the engine control module. When the p1288 fault code appears, it means that there is a problem with the engine coolant temperature sensor circuit. This could be due to a faulty sensor, a wiring issue, or a problem with the engine control module itself.

It is important to address this issue promptly as it can affect the engine’s performance and potentially lead to overheating. To fix the p1288 fault code, the first step is to inspect the wiring and connections related to the engine coolant temperature sensor.

If any damage or corrosion is found, it should be repaired or replaced.

If the wiring is in good condition, the next step is to test the sensor itself. If it is found to be faulty, it will need to be replaced. Finally, if the sensor and wiring are both functioning properly, the engine control module may need to be diagnosed and repaired.

It is recommended to consult a professional mechanic to accurately diagnose and fix the p1288 fault code.

What are the possible causes of fault code P1288 in an automobile?

The fault code P1288 in an automobile can be caused by various factors. These include a wrong thermostat, engine overheating, low engine coolant level, a faulty Cylinder Head Temperature (CHT) sensor, an open or shorted CHT sensor harness, or a poor electrical connection in the CHT sensor circuit. To fix this issue, it is recommended to check the possible causes mentioned above. Additionally, visually inspect the wiring harness and connectors for any damage, and look for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix fault code P1288?

To fix fault code P1288, start by visually inspecting the wiring harness and connectors. Check for any damaged components and look out for broken, bent, pushed out, or corroded connector pins. This will help identify any issues with the wrong thermostat, engine overheating, low engine coolant level, faulty Cylinder Head Temperature (CHT) sensor, or poor electrical connection in the Cylinder Head Temperature sensor circuit. Take a close look at the wiring harness and connectors to ensure everything is in proper working order.

What should I look for when checking for damaged components or corroded connector pins to resolve fault code P1288?

To resolve fault code P1288, start by checking for damaged components or corroded connector pins. Visually inspect the wiring harness and connectors, looking for any signs of damage. Pay attention to broken, bent, pushed out, or corroded pins on the connectors. By addressing these possible causes, you can effectively fix the issue and prevent further complications.

p1288 error fault code explained

To fix the P1288 fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion. Check the thermostat, engine coolant level, and Cylinder Head Temperature (CHT) sensor for any faults.

Make sure the CHT sensor circuit has a good electrical connection.

Scroll to Top