The automobile fault code P1278 indicates a problem with the Air fuel ratio (AF) Sensor 1 Bank 1. This can cause the Engine Light to turn on. Possible causes include a faulty sensor, open or shorted harness or connectors, poor electrical connection, fuel pressure issues, faulty fuel injector, intake or exhaust leaks, faulty PVC, or a faulty Air Flow Meter.

To fix this issue, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to ensure optimal engine performance.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1278 fault code.

  • The symptoms of the automobile fault code P1278 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1278 can be caused by a range of issues, including a faulty AF sensor, open or shorted harness or connectors, poor electrical connection, fuel pressure problems, faulty fuel injector, intake or exhaust leaks, and issues with the PVC or air flow meter.

  • The fault code P1278 can be caused by a faulty Air fuel ratio (A/F) Sensor 1 Bank 1, an open or shorted harness or connectors for the Air fuel ratio (A/F) Sensor 1 Bank 1, a poor electrical connection in the Air fuel ratio (A/F) Sensor 1 Bank 1 circuit, issues with fuel pressure, a faulty fuel injector, intake air leaks, exhaust gas leaks, a faulty PVC, or a faulty Air Flow Meter.

To fix the automobile fault code p1278, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P1278, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The automobile fault code P1278 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1278 fault code refers to the Air Fuel Ratio Sensor 1 Bank 1 Circuit Slow R.

This code indicates an issue with the sensor responsible for measuring the air-to-fuel ratio in the exhaust system of the vehicle. The Air Fuel Ratio (AF) sensor is a dual-cell limit current sensor that combines a Nernst concentration cell with an oxygen-pump cell. It has a heater to maintain the required operating temperature.

The sensor is capable of precise measurement in a wide range of air-to-fuel ratios, from lean to rich. It continuously outputs a clear signal within this range. The P1278 code specifically points to a slow response in the circuit of the AF sensor located in Bank 1, which refers to the side of the engine where cylinder 1 is located.

This slow response could be caused by various factors, such as a faulty sensor, wiring issues, or problems with the control electronics.

If you encounter this fault code, it is important to have the sensor and its circuitry inspected and repaired as necessary to ensure accurate air-to-fuel ratio measurements and optimal engine performance.

What are the possible causes of the automobile fault code P1278?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1278 could be the culprit. This code is often caused by a faulty air fuel ratio (A/F) sensor 1 bank 1, an open or shorted harness or connectors, poor electrical connection in the A/F sensor circuit, fuel pressure issues, a faulty fuel injector, intake air leaks, exhaust gas leaks, a faulty PVC, or a faulty air flow meter. To fix the issue, start by visually inspecting the wiring harness and connectors, checking for any damage or broken pins.

How can I visually inspect the wiring harness and connectors to fix the P1278 fault code?

If you’re dealing with the P1278 fault code and your engine light is on, it’s time to take action. The cause could be a faulty air fuel ratio (A/F) sensor, poor electrical connection, or even a faulty fuel injector. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, like broken or corroded pins. Don’t forget to check for any damaged components as well. Take a close look and get to the root of the problem.

What should I look for when checking for damaged components or corroded connector’s pins to resolve the P1278 fault code?

If you’re dealing with a P1278 fault code and your engine light is on, it’s important to check for damaged components or corroded connector’s pins. This issue can be caused by a faulty air fuel ratio (A/F) sensor, open or shorted harness or connectors, poor electrical connection, fuel pressure problems, faulty fuel injector, intake or exhaust leaks, or even a faulty PVC or air flow meter. To resolve this, visually inspect the wiring harness and connectors, paying close attention to any broken, bent, pushed out, or corroded pins. Don’t forget to check the other possible causes as well.

p1278 error fault code explained

If your engine light is on and you’re experiencing issues with your air fuel ratio, it’s likely due to a faulty AF sensor or other related components.

To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken or corroded pins.

Take action now to prevent further damage.

Scroll to Top