The automobile fault code P1253 indicates a problem with the VCT (Variable Camshaft Timing) oil control valve. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by low engine oil level, low engine oil pressure, blocked oil passage, or a faulty VCT oil control valve.

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the engine.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1253 fault code.

  • The symptoms of the automobile fault code P1253 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1253 can be caused by various factors, including low engine oil level, low oil pressure, blocked oil passage, and a faulty VCT oil control valve.

  • The fault code P1253 can be caused by the following: low engine oil level, low engine oil pressure, blocked oil passage, and a faulty VCT oil control valve.

To fix the p1253 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1253, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repair time estimation: 1.0 hour.

The automobile fault code P1253 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1253 fault code refers to a malfunction in the VTEC system.

The VTEC system works with the Engine Control Module (ECM) to activate the VTEC solenoid valve. This valve controls the oil pressure to the VTEC mechanism, which is responsible for switching valve timing between Low and High.

When there is an open or short circuit in the VTEC solenoid valve, the ECM stores the P1253 fault code.

This code indicates a problem with the VTEC system.

What are the possible causes of the automobile fault code P1253?

If you see the engine light on or the service engine soon warning light, the fault code P1253 could be the culprit. This code can be triggered by a few different causes, including low engine oil level, low engine oil pressure, a blocked oil passage, or a faulty VCT oil control valve. To fix the issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, making sure they’re in good condition. Also, inspect for any damaged components and check for any broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the P1253 fault code?

If you’re dealing with the P1253 fault code and your engine light is on, it’s time to take action. The cause could be low engine oil level, low oil pressure, a blocked oil passage, or a faulty VCT oil control valve. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. Don’t delay, get to the bottom of the issue and get your engine running smoothly again.

What should I look for when checking for damaged components or corroded connector pins to resolve the P1253 fault code?

When resolving the P1253 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By addressing these issues, you can effectively fix the problem and prevent further engine complications.

p1253 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1253 fault code.

This can be caused by low engine oil level, low oil pressure, blocked oil passage, or a faulty VCT oil control valve.

To fix it, check the possible causes, visually inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

Scroll to Top