Are you wondering what the automobile fault code P1246 means? Well, when you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a problem with your alternator or generator.
This fault code is often caused by a faulty alternatorgenerator, an open or shorted harness, poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM).
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. It’s important to look for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this issue is estimated to be around 1.0.
So, if you encounter this fault code, make sure to address it promptly to avoid any further complications.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
P1246 Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1246 fault code.
- The symptoms of the automobile fault code p1246 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: The Causes Behind Code P1246
The automobile fault code p1246 can be caused by a faulty alternatorgenerator, open or shorted harness, poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM).
- The fault code P1246 can be caused by a faulty alternator/generator, an open or shorted harness for the alternator/generator, a poor electrical connection in the alternator/generator circuit, or a damaged Powertrain Control Module (PCM).
Fixing Code P1246: Simple Steps To Resolve The Issue!
To fix the p1246 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1246, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1246 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p1246 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.
P1246: Understanding The Causes And Solutions For This Fault Code
The P1246 fault code indicates a problem with the alternator load input. The Powertrain Control Module (PCM) constantly monitors the load from the generatorregulator in terms of frequency.
This frequency range is determined by the temperature of the voltage regulator. When the frequency is at 97%, it means the generator is at full load, while a frequency below 6% indicates no load.
If the PCM detects a failure in the alternator load input, it will trigger the P1246 fault code. This code alerts the driver that there is an issue with the alternator’s load input, which may require attention and repair.
FAQ
If you see the engine light or service engine soon warning light on in your automobile, it could be due to fault code P1246. This code is often caused by a faulty alternator/generator, an open or shorted harness, a poor electrical connection in the alternator/generator circuit, or a damaged powertrain control module (PCM). To fix this issue, you should visually inspect the wiring harness and connectors, check for any damaged components, and look for any broken, bent, pushed out, or corroded pins in the connectors.
To fix fault code P1246, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors related to the alternator/generator. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues and allow for the necessary repairs to be made.
When resolving fault code P1246, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause a faulty alternator/generator, an open or shorted harness, poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM). By addressing these possible causes, you can resolve the issue and turn off the Engine Light or Service Engine Soon Warning Light.
Wrap Up
If your engine light is on and you’re dealing with fault code p1246, it could be due to a faulty alternatorgenerator, an open or shorted harness, a poor electrical connection in the circuit, or a damaged powertrain control module (PCM). To fix this issue, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
