The automobile fault code P1235 indicates a problem with the Fuel Pump Drive Module (FPDM). The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.
The cause could be a faulty FPDM, an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or a faulty Powertrain Control Module (PCM).
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0.
It is important to address this problem promptly to ensure proper functioning of the fuel pump system.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling The Symptoms Of Fault Code P1235: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1235 fault code.
- The symptoms of the automobile fault code P1235 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1235?
The automobile fault code P1235 can be caused by a faulty Fuel Pump Drive Module (FPDM), an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or a faulty Powertrain Control Module (PCM).
- The fault code P1235 can be caused by a faulty Fuel Pump Drive Module (FPDM), an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or a faulty Powertrain Control Module (PCM).
Fixing Code P1235: Simple Steps To Resolve The Issue!
To fix the p1235 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1235, follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1235 – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code P1235 are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the P1235 fault code.
P1235: Understanding The Causes And Solutions For This Fault Code
The P1235 code means that the Fuel Pump Drive Module (FPDM) has detected a problem with the Fuel Pump (FP) circuit signal from the Powertrain Control Module (PCM).
This code is set when the FPDM sends a message to the PCM indicating that an invalid or missing signal was detected.
In simpler terms, it means there is an issue with the fuel pump control that needs to be addressed.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1235 could be the culprit. This code is often caused by a faulty fuel pump drive module (FPDM), an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or a faulty powertrain control module (PCM). To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to address the possible causes mentioned above.
If you’re dealing with the P1235 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Fuel Pump Drive Module (FPDM), an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or even a faulty Powertrain Control Module (PCM). To fix this issue, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t delay, get to the bottom of this problem now!
When resolving the P1235 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection or an open/short circuit, leading to the faulty fuel pump drive module or powertrain control module. By addressing these possible causes, you can fix the issue and turn off the engine light or service engine soon warning light.
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the cause could be a faulty Fuel Pump Drive Module (FPDM), an open or shorted FPDM harness, a poor electrical connection in the FPDM circuit, or a faulty Powertrain Control Module (PCM). To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
