The automobile fault code P1219 indicates a problem with the Injector Driver Module (IDM). Symptoms may include engine misfires, rough idling, or a decrease in overall performance. The cause of this fault code could be a faulty IDM, an open or shorted IDM harness, or a poor electrical connection in the IDM circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to prevent further damage to the engine.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing rough idling, stalling, and decreased engine performance? Check out the symptoms of fault code p1219 below.

  • The symptoms of automobile fault code P1219 may include engine misfires, rough idling, hesitation or stumbling during acceleration, reduced power or performance, illuminated check engine light, and difficulty starting the vehicle.

The automobile fault code p1219 can be caused by a faulty Injector Driver Module (IDM), an open or shorted IDM harness, or a poor electrical connection in the IDM circuit.

  • The fault code P1219 can be caused by the following: a faulty Injector Driver Module (IDM), an open or shorted harness for the Injector Driver Module (IDM), and a poor electrical connection in the Injector Driver Module (IDM) circuit.

To fix fault code p1219, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1219, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1219 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p1219 fault code.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P1219. This code indicates an issue with the Engine Overtemperature Protection Active. It means that the engine temperature has exceeded the safe operating range, and the protection system has been activated to prevent any further damage.

When this fault code appears, it is crucial to address the issue promptly to avoid any potential engine damage.

The first step is to check the coolant level and ensure it is at the recommended level. If the coolant level is low, it may indicate a leak or a faulty cooling system component.

In such cases, it is necessary to inspect the cooling system for any leaks or damaged parts and repair or replace them as needed. Additionally, it is essential to check the operation of the thermostat and the radiator fan to ensure proper cooling. Ignoring the P1219 fault code can lead to severe engine damage and costly repairs.

Therefore, it is advisable to have the issue diagnosed and resolved by a qualified mechanic as soon as possible. By addressing the problem promptly, you can ensure the longevity and reliability of your vehicle’s engine.

What are the possible causes of fault code P1219 in an automobile?

The fault code P1219 in an automobile can be caused by a faulty Injector Driver Module (IDM), an open or shorted IDM harness, or a poor electrical connection in the IDM circuit. To fix this issue, visually inspect the wiring harness and connectors related to the IDM. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It is also recommended to check the possible causes listed above.

How can I visually inspect the wiring harness and connectors to fix fault code P1219?

To fix fault code P1219, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This will help identify any issues with the Injector Driver Module (IDM) or its circuit. By checking for these possible causes, you can take the necessary steps to resolve the fault code.

What should I look for when checking for damaged components and connector pins to resolve fault code P1219?

To resolve fault code P1219, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a faulty Injector Driver Module (IDM) or poor electrical connection in the IDM circuit. By checking for these potential causes, you can identify and resolve the problem effectively.

p1219 error fault code explained

If you’re experiencing issues with your vehicle and the fault code P1219 pops up, it could be due to a faulty Injector Driver Module (IDM). To fix this, start by visually inspecting the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top