The automobile fault code P119B indicates a problem with the Fuel Rail Pressure Sensor.

When this fault code is triggered, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Fuel Rail Pressure Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit.

To fix this problem, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to ensure proper functioning of the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p119b fault code.

  • The symptoms of the automobile fault code P119B include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p119b can be caused by a faulty fuel rail pressure sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code p119b can be caused by: a faulty Fuel Rail Pressure Sensor, an open or shorted Fuel Rail Pressure Sensor harness, and a poor electrical connection in the Fuel Rail Pressure Sensor circuit.

To fix the automobile fault code p119b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p119b, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p119b are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P119B fault code refers to a malfunction in the fuel rail pressure sensor. This sensor is located on the fuel rail and is responsible for measuring the fuel pressure. It sends a voltage signal to the Engine Control Module (ECM), which controls the fuel pressure in the fuel rail.

The ECM uses the feedback signal from the fuel rail pressure sensor to regulate the high pressure fuel pump. When the fuel rail pressure sensor is not operating within factory specifications, the ECM sets the P119B code. This code indicates a problem with the fuel rail pressure sensor.

What are the possible causes of the automobile fault code P119B?

If you see the engine light or service engine soon warning light on, the fault code P119B could be the culprit. This code is often caused by a faulty fuel rail pressure sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P119B fault code?

To fix the P119B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty fuel rail pressure sensor, an open or shorted harness, or a poor electrical connection. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

What should I look for when checking for damaged components and connector pins to resolve the P119B fault code?

When resolving the P119B fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues with the Fuel Rail Pressure Sensor or its circuit connections, which may be causing the engine light to turn on.

p119b error fault code explained

If your engine light is on, it could be due to a faulty fuel rail pressure sensor or issues with the sensor’s wiring.

To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top