The automobile fault code P1195 indicates a problem with the Electronic Throttle System (ETS).
The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty ETS motor, a faulty ETS unit, an open or shorted ETS harness, or a poor electrical connection in the ETS circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this problem promptly to ensure the proper functioning of the Electronic Throttle System.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Unveiling The Symptoms Of Fault Code P1195: A Comprehensive Guide
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1195 fault code.
- The symptoms of the automobile fault code P1195 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1195?
The automobile fault code p1195 can be caused by a faulty ETS motor, ETS unit, open or shorted ETS harness, or poor electrical connection in the ETS circuit.
- The fault code P1195 can be caused by a faulty Electronic Throttle System (ETS) Motor, a faulty Electronic Throttle System (ETS), a malfunctioning Electronic Throttle System (ETS) unit, an open or shorted Electronic Throttle System (ETS) harness, or a poor electrical connection in the Electronic Throttle System (ETS) circuit.
Fixing Code P1195: Simple Steps To Solve The Issue
To fix the p1195 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1195, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P1195 Fixing Cost And Complexity Unveiled!
The automobile fault code P1195 can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P1195 Fault Code: Understanding The Description And Troubleshooting Tips
The P1195 fault code refers to a problem with the Electronic Throttle System (ETS) in your vehicle. This system includes various components such as the ETS unit, ETS-motor, Accelerator Position Sensor (APS), Throttle Position Sensor (TPS), and the Limp home valve.
The Limp home valve is located under the throttle body and its purpose is to allow air to flow from the outside to the engine combustion chamber. This helps prevent the engine from stalling when the Powertrain Control Module (PCM) detects a malfunction in the ETS system. The specific issue indicated by the P1195 code is a delay in the ETS system’s ability to follow the target set by the PCM.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P1195 could be the culprit. This code is often caused by a faulty Electronic Throttle System (ETS) motor, a problem with the ETS unit itself, an open or shorted ETS harness, or a poor electrical connection in the ETS circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.
If you’re dealing with the P1195 fault code and notice that your engine light is on, it’s time to take action. The most likely cause of this issue is a faulty Electronic Throttle System (ETS) Motor or a problem with the ETS unit itself. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the problem.
If you’re dealing with a P1195 fault code and your engine light is on, it’s important to check for damaged components and connector’s pins. This fault code is often caused by a faulty Electronic Throttle System (ETS) Motor, ETS unit, or a poor electrical connection in the ETS circuit. To resolve the issue, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look out for broken, bent, pushed out, or corroded connector’s pins. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.
Wrap Up
If your engine light is on and you’re seeing the P1195 fault code, it could be due to a faulty Electronic Throttle System (ETS) Motor, ETS unit, or a problem with the ETS harness. To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors.
Take action now to prevent further issues.
