The automobile fault code P1194 indicates a problem with the Electronic Throttle System (ETS). The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty ETS motor, a faulty ETS unit, an open or shorted ETS harness, or a poor electrical connection in the ETS circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1194 fault code.

  • The symptoms of the automobile fault code P1194 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1194 can be caused by a faulty ETS motor, ETS system, ETS unit, open or shorted ETS harness, or poor electrical connection in the ETS circuit.

  • The fault code P1194 can be caused by a faulty Electronic Throttle System (ETS) Motor, a faulty Electronic Throttle System (ETS), a malfunctioning Electronic Throttle System (ETS) unit, an open or shorted Electronic Throttle System (ETS) harness, or a poor electrical connection in the Electronic Throttle System (ETS) circuit.

To fix the p1194 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1194, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p1194 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

The P1194 fault code refers to a problem with the Throttle Actuator Control System Limp Home-Throttle Position Sensor 2 Position. This code is related to the Electronic Throttle System (ETS) in your vehicle.

The ETS system consists of several components, including the ETS unit, ETS motor, Accelerator Position Sensor (APS), Throttle Position Sensor (TPS), and the Limp Home Valve.

The Limp Home Valve is located under the throttle body and allows air to flow from the outside to the engine combustion chamber. When the Powertrain Control Module (PCM) detects a malfunction in the ETS system, it activates the Limp Home Valve to prevent the engine from stalling.

The P1194 code specifically indicates an issue with the Throttle Position Sensor 2 position. If you encounter this fault code, it is important to have your vehicle inspected and repaired by a qualified technician. They will be able to diagnose the exact cause of the problem and perform the necessary repairs to ensure your vehicle operates smoothly and efficiently.

What are the possible causes of the automobile fault code P1194?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1194 could be the culprit. This code is often caused by a faulty Electronic Throttle System (ETS) motor, a problem with the ETS unit itself, an open or shorted ETS harness, or a poor electrical connection in the ETS circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P1194 fault code?

If you’re dealing with the P1194 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Electronic Throttle System (ETS) Motor, ETS unit, or a poor electrical connection in the ETS circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. Don’t forget to check the “Possible Causes” mentioned earlier. It’s time to get hands-on and find the solution!

What should I look for when checking for damaged components and connector’s pins to resolve the P1194 fault code?

If you’re dealing with the P1194 fault code and notice that your engine light is on, it’s important to check for damaged components and connector’s pins. This fault code is often caused by a faulty Electronic Throttle System (ETS) Motor, ETS unit, or a poor electrical connection in the ETS circuit. To resolve the issue, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look out for broken, bent, pushed out, or corroded connector’s pins. By checking these possible causes and conducting a thorough inspection, you can effectively address the P1194 fault code.

p1194 error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty Electronic Throttle System (ETS) Motor, ETS unit, or a problem with the ETS harness. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken or bent pins on the connectors.

Take action now to prevent further issues.

Scroll to Top