The automobile fault code P117E indicates a problem with the Fuel Volume Control Valve Control. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing.
The possible causes include a faulty Fuel Volume Control Valve Control, an open or shorted Fuel Volume Control Valve Control harness, or a poor electrical connection in the Fuel Volume Control Valve Control circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this problem is estimated to be 1.0.
It is important to address this issue promptly to prevent further damage to the vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Decode The Symptoms: Unveiling The Mystery Of Code P117E
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p117e fault code.
- The symptoms of the automobile fault code p117e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P117E?
The automobile fault code p117e can be caused by a faulty fuel volume control valve control, an open or shorted harness, or a poor electrical connection in the control circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- The fault code P117E can be caused by the following: – Faulty Fuel Volume Control Valve Control.
- – Open or shorted Fuel Volume Control Valve Control harness.
- – Poor electrical connection in the Fuel Volume Control Valve Control circuit.
Fixing Code P117E: Simple Steps To Resolve The Issue
To resolve the p117e fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p117e, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P117E – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p117e are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p117e fault code.
P117E Fault Code: Understanding The Cause And Fix
If you come across the automobile fault code P117E, it means that the fuel volume control valve control has exceeded the minimum control limit. To address this issue, you should start by checking the fuel volume control valve and its circuits. Additionally, it is important to measure the resistance of the valve.
If the resistance falls outside the range of 1.5 to 15 ohms, it is recommended to install a new fuel pump. It’s worth noting that the fuel volume control valve cannot be serviced separately.
By following these steps, you can effectively resolve the P117E fault code and ensure optimal performance of your vehicle’s fuel system.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P117E could be the culprit. This code is often caused by a faulty fuel volume control valve control or issues with the wiring harness and connectors. To fix the problem, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to resolve the issue.
To fix the P117E fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty fuel volume control valve control or if there is an open or shorted circuit. Take note of any findings to further troubleshoot and resolve the problem.
When resolving the P117E fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By addressing these issues, you can effectively fix the problem and prevent further complications.

Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Fuel Volume Control Valve Control.
To fix this, visually inspect the wiring harness and connectors for any damage.
Also, check for broken, bent, pushed out, or corroded connector pins.