The automobile fault code P117D indicates a problem with the Fuel Volume Control Valve Control.
This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing. The cause of this fault code could be a faulty Fuel Volume Control Valve Control, an open or shorted harness, or a poor electrical connection in the Fuel Volume Control Valve Control circuit.
To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0.
To interpret the fault code, check the “Possible Causes” listed above and follow the suggested steps for inspection and repair.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P117D Fault Code: Unveiling The Symptoms Of Automotive Troubles
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p117d fault code.
- The symptoms of the automobile fault code P117D include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P117D?
The automobile fault code p117d can be caused by a faulty fuel volume control valve control, an open or shorted harness, or a poor electrical connection in the control circuit.
- The fault code P117D can be caused by the following: 1.
- Faulty Fuel Volume Control Valve Control.
- 2.
- Open or shorted Fuel Volume Control Valve Control harness.
- 3.
- Poor electrical connection in the Fuel Volume Control Valve Control circuit.
Fixing Code P117D: Simple Steps To Resolve The Issue
To fix the automobile fault code p117d, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p117d, first, check the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P117D – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p117d are the estimated repair time of 1.0 hour and the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.
P117D Fault Code: Uncovering The Mystery Behind Engine Fuel Trim Imbalance
If you come across the P117D fault code in your automobile, it indicates an issue with the fuel volume control valve and its circuits. To diagnose the problem, you should first check the resistance of the valve. If the resistance is not within the range of 1.5 to 15 ohms, it’s recommended to install a new fuel pump.
It’s important to note that the fuel volume control valve cannot be serviced separately. The P117D code specifically points to the fuel volume control valve control exceeding the maximum control limit.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P117D could be the culprit. This code is often caused by a faulty fuel volume control valve control or issues with the wiring harness and connectors. To fix the problem, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to resolve the issue.
To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes. Then, visually inspect the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues with the Fuel Volume Control Valve Control and its electrical connections.
When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components and corroded connector pins. These issues can cause a faulty fuel volume control valve control, an open or shorted harness, or a poor electrical connection. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors.
Wrap Up
To fix the P117D fault code, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins.
This will help resolve the issue and turn off the Engine Light or Service Engine Soon Warning Light.
