The automobile fault code P1166 indicates a problem with the AirFuel Ratio Sensor 1. Symptoms may include poor engine performance and increased fuel consumption.

The cause could be a faulty sensor, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to ensure optimal engine performance and fuel efficiency.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

Experiencing engine misfires, reduced power, and increased fuel consumption? Check out the symptoms of fault code p1166 below.

  • The symptoms of automobile fault code P1166 may include: engine misfires, rough idling, decreased fuel efficiency, difficulty starting the engine, stalling or hesitation during acceleration, illuminated check engine light, and reduced engine power.

The automobile fault code p1166 can be caused by a faulty AirFuel Ratio Sensor 1, an open or shorted harness, or a poor electrical connection in the sensor circuit.

  • The fault code P1166 can be caused by a faulty Air/Fuel Ratio Sensor 1, an open or shorted harness for the Air/Fuel Ratio Sensor 1, or a poor electrical connection in the circuit of the Air/Fuel Ratio Sensor 1.

To fix the p1166 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1166, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p1166 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P1166.

This code indicates a problem with the airfuel ratio sensor heater circuit in Bank 1. In simpler terms, it means that there is an issue with the sensor responsible for measuring the amount of oxygen in the exhaust gases. The airfuel ratio sensor plays a crucial role in ensuring that the engine is running efficiently.

It helps the engine control module (ECM) adjust the fuel mixture to achieve optimal combustion. However, when the heater circuit in Bank 1 malfunctions, it can lead to inaccurate readings and affect the engine’s performance. To fix this issue, you will need to diagnose the exact cause of the problem.

It could be a faulty sensor, a damaged wiring harness, or a problem with the ECM itself.

A professional mechanic will use specialized diagnostic tools to identify the root cause and then proceed with the necessary repairs. Ignoring this fault code can lead to decreased fuel efficiency and potential damage to the engine over time.

So, it’s important to address it promptly to ensure your vehicle runs smoothly and efficiently.

What are the possible causes of fault code P1166 in an automobile?

The fault code P1166 in an automobile can be caused by a faulty Air/Fuel Ratio Sensor 1, an open or shorted harness for the sensor, or a poor electrical connection in the sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix fault code P1166?

To fix fault code P1166, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty Air/Fuel Ratio Sensor 1, an open or shorted harness, or a poor electrical connection in the circuit. Make sure to check the possible causes mentioned above for a comprehensive solution.

What should I look for when checking for damaged components and connector pins to resolve fault code P1166?

To resolve fault code P1166, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a faulty Air/Fuel Ratio Sensor 1 or a poor electrical connection in the sensor circuit. By checking for these potential causes, you can identify and resolve the problem effectively.

p1166 error fault code explained

If you’re experiencing issues with your vehicle and the P1166 fault code pops up, it could be due to a faulty AirFuel Ratio Sensor 1. To fix this, visually inspect the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top