The automobile fault code P1145 indicates a problem with the Intake Valve Timing Control Solenoid Valve.

Symptoms may include rough idling, decreased engine performance, and increased fuel consumption. The code can be triggered by a faulty solenoid valve, open or shorted wiring harness, poor electrical connection, or faulty crankshaft or camshaft position sensors.

To fix the issue, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

Experiencing rough idling, decreased engine performance, and potential stalling?

Check out the symptoms of fault code p1145 below.

  • The symptoms of automobile fault code P1145 may include: – Check Engine Light (CEL) illuminated – Decreased engine performance – Rough idling – Hesitation or stumbling during acceleration – Poor fuel efficiency – Engine misfires – Reduced power output – Increased exhaust emissions.

The automobile fault code p1145 can be caused by a faulty intake valve timing control solenoid valve, open or shorted harness, poor electrical connection, faulty crankshaft position sensor, or faulty camshaft position sensor.

  • The fault code P1145 can be caused by the following issues: a faulty intake valve timing control solenoid valve, an open or shorted harness for the intake valve timing control solenoid valve, a poor electrical connection in the intake valve timing control solenoid valve circuit, a faulty crankshaft position sensor, and a faulty camshaft position sensor.

To fix the p1145 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1145, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p1145 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

When you see the dreaded Engine Light ON or the Service Engine Soon Warning Light, it’s time to pay attention. One possible culprit behind this warning is the fault code P1145.

This code can lead to engine lack or loss of power, which is definitely not what you want when you’re on the road.

Another symptom you might experience is engine roughness, making your ride anything but smooth. Don’t ignore this code, as it could be a sign of a more serious issue.

Get it checked out and fixed as soon as possible to avoid further complications.

What are the possible causes of the automobile fault code p1145?

The fault code P1145 in an automobile can be caused by a few different factors. One possible cause is a faulty Intake Valve Timing Control Solenoid Valve. It could also be due to an open or shorted harness for the solenoid valve, or a poor electrical connection in the circuit. Another potential cause is a faulty Crankshaft Position Sensor or Camshaft Position Sensor. To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for any broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the p1145 fault code?

To fix the p1145 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This will help identify any issues with the Intake Valve Timing Control Solenoid Valve or the Crankshaft and Camshaft Position Sensors, which could be causing the fault. Take note of any poor electrical connections or open/shorted circuits.

What should I look for when checking for damaged components and connector’s pins to resolve the p1145 fault code?

To resolve the p1145 fault code, start by checking for damaged components and connector’s pins. This fault code can be caused by a faulty Intake Valve Timing Control Solenoid Valve, an open or shorted harness, a poor electrical connection in the circuit, a faulty Crankshaft Position Sensor, or a faulty Camshaft Position Sensor. Visually inspect the wiring harness and connectors, and look for any signs of damage such as broken, bent, pushed out, or corroded pins. Don’t forget to check the “Possible Causes” listed above for a comprehensive solution.

p1145 error fault code explained

To fix the p1145 fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion.

Check the intake valve timing control solenoid valve and the crankshaft and camshaft position sensors. Make sure there are no broken or bent pins on the connectors.

Take action to address any issues found.

Scroll to Top