The automobile fault code P1136 indicates a problem with the Intake Valve Timing Control Solenoid Bank 2. Symptoms may include poor engine performance and reduced fuel efficiency.
The cause could be a faulty solenoid, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins on the connectors.
The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to prevent further damage to the engine.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Decode P1136: Unveiling The Symptoms Of This Automobile Fault Code
Experiencing rough idling, decreased fuel efficiency, and potential engine stalling are common symptoms of the automobile fault code: p1136.
- The symptoms of automobile fault code P1136 include: rough idle, poor acceleration, engine misfires, decreased fuel efficiency, check engine light illuminated, and difficulty starting the vehicle.
Unraveling The Mystery: What Causes Fault Code P1136?
The automobile fault code p1136 can be caused by a faulty intake valve timing control solenoid, an open or shorted harness, or a poor electrical connection in the circuit.
- The fault code P1136 can be caused by the following: a faulty intake valve timing control solenoid in Bank 2, an open or shorted harness for the intake valve timing control solenoid in Bank 2, or a poor electrical connection in the circuit for the intake valve timing control solenoid in Bank 2.
Fixing Code P1136: Simple Steps To Resolve The Issue!
To fix the automobile fault code p1136, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code P1136, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P1136 Fixing Cost And Complexity Unveiled!
The fault code p1136 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services.
Decode P1136: Unveiling The Symptoms And Solutions
When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P1136.
This code indicates a possible lack or loss of power in the engine. You may also experience engine roughness as a symptom.
It is important to address this issue promptly to ensure optimal performance and prevent further damage.
FAQ
The fault code P1136 in an automobile could be caused by a faulty Intake Valve Timing Control Solenoid Bank 2, an open or shorted harness for the solenoid, or a poor electrical connection in the solenoid circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken pins. It’s important to address these possible causes to resolve the fault code.
To visually inspect the wiring harness and connectors related to the Intake Valve Timing Control Solenoid Bank 2, start by checking for any damaged components. Look closely for any broken, bent, pushed out, or corroded pins on the connectors. This can help identify if the harness is open or shorted, or if there is a poor electrical connection in the Intake Valve Timing Control Solenoid Bank 2 circuit. By conducting this thorough inspection, you can pinpoint the cause of the issue and proceed with the necessary fix.
When dealing with fault code P1136, it is important to check for damaged components or corroded connector pins. This fault code is often caused by a faulty Intake Valve Timing Control Solenoid Bank 2 or issues with the related wiring harness and connectors. To fix this problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded connector pins, as these can contribute to the fault code.
Wrap Up
To fix the P1136 fault code, start by visually inspecting the wiring harness and connectors related to the Intake Valve Timing Control Solenoid Bank 2.
Look for any damage or corrosion on the components and check for broken, bent, pushed out, or corroded connector pins. Address any issues found.
