[SOLVED] P1130 Code: Fix Swirl Control Valve Control Solenoid Valve Issue!

The automobile fault code P1130 indicates a problem with the swirl control valve in the engine. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on. The possible causes include a faulty swirl control valve control solenoid valve, open or shorted circuits, or a faulty swirl control valve actuator.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0.

It is important to address this issue promptly to ensure optimal engine performance.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1130 fault code.

  • The symptoms of the automobile fault code P1130 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code P1130 can be caused by a faulty swirl control valve, swirl control valve circuit issues, or a malfunctioning swirl control valve actuator.

  • The fault code P1130 can be caused by the following: a faulty swirl control valve control solenoid valve, an open or shorted circuit of the swirl control valve control solenoid valve, an open or shorted circuit of the swirl control valve, a faulty swirl control valve, and a faulty swirl control valve actuator.

To fix the automobile fault code p1130, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P1130, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P1130 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

Most auto repair shops typically charge between $75 and $150 per hour for their services.

The P1130 fault code refers to the Swirl Control Valve Control Solenoid Valve in the automobile’s intake passage.

This system plays a crucial role in improving fuel consumption and increasing stability during low engine speed operation. It achieves this by closing the swirl control valve, which increases the air velocity in the intake passage, promoting fuel vaporization and creating a swirl in the combustion chamber.

During normal operation, except when idling or at low engine speeds, the swirl control valve opens to enhance power by improving intake efficiency and reducing intake flow resistance. The solenoid valve, controlled by the Engine Control Module (ECM), determines the shutopen condition of the swirl control valve.

When the ECM sends an ON signal, the solenoid valve bypasses to apply intake manifold vacuum, closing the swirl control valve.

Conversely, when the ECM sends an OFF signal, the vacuum signal is cut, and the swirl control valve opens.

The P1130 fault code indicates a potential issue with the Swirl Control Valve Control Solenoid Valve. It is essential to diagnose and address this problem promptly to ensure optimal engine performance and fuel efficiency.

What are the possible causes of the automobile fault code P1130?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P1130 could be the culprit. This code is often caused by a faulty swirl control valve control solenoid valve, an open or shorted circuit for the swirl control valve control solenoid valve, an open or shorted circuit for the swirl control valve, a faulty swirl control valve, or a faulty swirl control valve actuator. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the P1130 fault code?

If you’re dealing with the P1130 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty swirl control valve control solenoid valve or a problem with the swirl control valve circuit. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. Don’t delay – check for these possible causes and get your engine back in top shape.

What should I look for when checking for damaged components or broken, bent, pushed out, or corroded connector’s pins to fix the P1130 fault code?

When troubleshooting the P1130 fault code, it is important to visually inspect the wiring harness and connectors for any damage. Specifically, check for broken, bent, pushed out, or corroded connector pins. These issues can cause an open or short circuit, leading to the engine light being on. By identifying and fixing these damaged components, such as the swirl control valve or its actuator, you can resolve the P1130 fault code.

p1130 error fault code explained

If your engine light is on or you see the service engine soon warning light, the P1130 fault code may be the culprit. This code is usually caused by a faulty swirl control valve control solenoid valve, an open or shorted circuit, or a faulty swirl control valve or actuator. To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top