The automobile fault code P1124 indicates a problem with the Throttle Control Motor relay. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing. The cause of this fault code can be a faulty Throttle Control Motor relay, an open or shorted harness, or a poor electrical connection in the relay circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be 1.0.

To interpret the fault code, check the “Possible Causes” mentioned above and follow the suggested steps for inspection and repair.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1124 fault code.

  • The symptoms of the automobile fault code p1124 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1124 can be caused by a faulty Throttle Control Motor relay, an open or shorted Throttle Control Motor relay harness, or a poor electrical connection in the Throttle Control Motor relay circuit.

  • The fault code P1124 can be caused by a faulty Throttle Control Motor relay, an open or shorted Throttle Control Motor relay harness, or a poor electrical connection in the Throttle Control Motor relay circuit.

To fix fault code p1124, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1124, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p1124 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

The P1124 fault code refers to a problem with the throttle control motor relay circuit. This circuit is responsible for providing power to the throttle control motor, which is controlled by the Engine Control Module (ECM). When the ignition switch is turned on, the ECM sends a signal to the throttle control motor relay, allowing battery voltage to be provided to the ECM.

However, when the ignition switch is turned off, the ECM sends a signal to the relay to turn it off, cutting off battery voltage to the ECM.

This fault code indicates an issue with this circuit, which may result in problems with the throttle control motor and its operation.

What are the possible causes for the automobile fault code p1124?

If you see the engine light or service engine soon warning light on, the fault code P1124 could be the culprit. This code is often caused by a faulty throttle control motor relay, an open or shorted throttle control motor relay harness, or a poor electrical connection in the throttle control motor relay circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p1124 fault code?

If you’re dealing with the p1124 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Throttle Control Motor relay or issues with the relay harness and circuit connection. To fix this, start by visually inspecting the wiring harness and connectors. Look out for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. Don’t delay, get to the bottom of this issue and ensure a smooth ride ahead.

What should I look for when checking for damaged components and connector’s pins to resolve the p1124 fault code?

When resolving the p1124 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Throttle Control Motor relay or its circuit, which may be causing the engine light to turn on.

p1124 error fault code explained

If your engine light is on and you’re getting the P1124 fault code, it could be due to a faulty Throttle Control Motor relay or issues with the relay harness.

To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top