The automobile fault code P111F indicates a problem with the Intake Air Temperature Sensor. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

By addressing this fault code promptly, you can ensure the proper functioning of your vehicle’s intake air temperature sensor.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p111f fault code.

  • The symptoms of the automobile fault code p111f include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p111f can be caused by a faulty intake air temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code p111f can be caused by: a faulty intake air temperature sensor, an open or shorted intake air temperature sensor harness, and a poor electrical connection in the intake air temperature sensor circuit.

To fix the p111f fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p111f, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p111f include the estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services. These factors play a significant role in determining the overall cost of addressing the fault code.

The P111F fault code refers to the Intake Air Temperature (IAT) sensor and indicates a plausibility issue. The IAT sensor is responsible for detecting the temperature of the incoming air and sending a signal to the Engine Control Module (ECM).

It uses a thermistor that changes its electrical resistance based on temperature. When the ECM receives a signal from the IAT sensor that is not within the expected range, it triggers the P111F fault code.

This could be due to a faulty sensor, a wiring issue, or a problem with the ECM itself. To fix the P111F fault code, the first step is to inspect the wiring and connections related to the IAT sensor.

Look for any signs of damage or loose connections. If everything appears to be in order, the next step is to test the IAT sensor using a multimeter. If the sensor is found to be faulty, it will need to be replaced.

If the sensor and wiring are functioning correctly, further diagnosis may be required to identify any issues with the ECM.

What are the possible causes for the automobile fault code p111f?

If you see the engine light or service engine soon warning light on, the fault code P111F could be the culprit. This code is often caused by a faulty intake air temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors to fix the p111f fault code?

If you’re dealing with the p111f fault code and your engine light is on, it’s time to take action. The most likely cause is a faulty Intake Air Temperature Sensor or issues with the sensor’s wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the issue.

What should I look for when checking for damaged components and connector’s pins to resolve the p111f fault code?

When resolving the p111f fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing so, you can identify any issues with the Intake Air Temperature Sensor or its circuit connection, which may be the cause of the fault code.

p111f error fault code explained

If your engine light is on, it could be due to a faulty Intake Air Temperature Sensor or issues with the sensor’s wiring. To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken or corroded pins on the connectors.

Take action now to prevent further problems.

Scroll to Top