The automobile fault code P1114 indicates a problem with the Intake Air Temperature Sensor 2.
This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty sensor, an open or shorted harness, poor electrical connection, or a damaged Powertrain Control Module (PCM). To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0.
It is important to address this fault code promptly to prevent further damage to the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Unveiling The Mystery: Symptoms Of Fault Code P1114 Revealed!
When the p1114 fault code appears, the Engine Light will illuminate, indicating the presence of a problem.
- The symptoms of the automobile fault code p1114 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Decoding The Causes Of Code P1114
The automobile fault code p1114 can be caused by a faulty Intake Air Temperature Sensor 2, an open or shorted harness, a poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM).
- The fault code P1114 can be caused by the following: a faulty Intake Air Temperature Sensor 2, an open or shorted harness for the Intake Air Temperature Sensor 2, a poor electrical connection in the Intake Air Temperature Sensor 2 circuit, or a damaged Powertrain Control Module (PCM).
Fixing Code P1114: Simple Steps To Solve The Issue
To fix fault code p1114, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1114, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P1114 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p1114 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P1114 Fault Code: Understanding The Cause And Fix
The P1114 fault code refers to a problem with the Intake Air Temperature (IAT) Sensor 2 Circuit.
The IAT sensor is a thermistor device that measures the temperature of the air entering the engine. It provides this information to the Powertrain Control Module (PCM) to help calculate fuel, spark, and air flow. The P1114 code indicates that there is a low voltage signal coming from the IAT Sensor 2 Circuit.
This could be caused by a faulty sensor, a wiring issue, or a problem with the PCM itself. It is important to address this issue as it can affect the engine’s performance and fuel efficiency. A qualified mechanic should diagnose and repair the problem to ensure proper functioning of the vehicle.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P1114 could be the culprit. This code is often caused by a faulty intake air temperature sensor 2, an open or shorted harness, a poor electrical connection in the sensor circuit, or a damaged powertrain control module (PCM). To visually inspect these possible causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.
If you notice that your engine light is ON or you see a Service Engine Soon Warning Light, it could be due to a faulty Intake Air Temperature Sensor 2. This can happen if the sensor harness is open or shorted, if there is a poor electrical connection in the sensor circuit, or if the Powertrain Control Module (PCM) is damaged. To fix this issue, you should check the possible causes mentioned above. Take a close look at the wiring harness and connectors, inspect for any damage, and check for broken, bent, pushed out, or corroded pins in the connectors.
If you suspect a poor electrical connection or a damaged Powertrain Control Module (PCM) as the cause of the P1114 fault code, there are a few steps you can take to address the issue. First, visually inspect the related wiring harness and connectors to check for any damage. Look for broken, bent, pushed out, or corroded connector pins. This will help you identify any potential issues with the electrical connection. By checking these possible causes, you can take the necessary steps to fix the problem and ensure your engine is running smoothly.
Wrap Up
If your engine light is on and you’re dealing with a P1114 fault code, it’s likely due to a faulty Intake Air Temperature Sensor 2.
To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken or bent pins on the connectors.
