The automobile fault code P1105 indicates a problem with the Manifold Absolute Pressure (MAP) sensor. This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated. The possible causes include a faulty MAP sensor, an open or shorted MAP harness, poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).

To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be 1.0.

It is important to address this fault code promptly to ensure optimal engine performance.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level6.67 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p1105 fault code.

  • The symptoms of the automobile fault code p1105 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1105 can be caused by a faulty Manifold Absolute Pressure (MAP), an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).

  • The fault code P1105 can be caused by a faulty Manifold Absolute Pressure (MAP) sensor, an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).

To fix the p1105 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1105, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p1105 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p1105 fault code.

The P1105 fault code indicates a malfunction in the Manifold Absolute Pressure (MAP) sensor. This sensor provides important information about the pressure in the engine’s intake manifold to the Engine Control Module (ECM). The ECM uses this data to calculate air density and determine the engine’s air mass flow rate.

This information is crucial for determining the correct fuel metering for optimal combustion. In some fuel-injected engines, a Mass Air Flow (MAF) sensor may be used instead of a MAP sensor to detect the intake airflow. However, it is rare for an engine to use both sensors simultaneously.

The P1105 code specifically points to an issue with the MAP sensor, indicating that it is not functioning properly.

This can lead to incorrect fuel metering and potentially affect the engine’s performance.

What are the possible causes of the automobile fault code p1105?

If you see the engine light on or the service engine soon warning light, the fault code P1105 could be the culprit. This code is often caused by a faulty Manifold Absolute Pressure (MAP) sensor, an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM). To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p1105 fault code?

If you’re dealing with the p1105 fault code and your engine light is on, it’s time to take action. The cause could be a faulty Manifold Absolute Pressure (MAP), an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM). To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t delay, get to the bottom of the issue and get your engine running smoothly again.

What should I look for when checking for damaged components and connector’s pins to resolve the p1105 fault code?

When resolving the p1105 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing so, you can identify any faults in the Manifold Absolute Pressure (MAP) circuit and address them accordingly. Don’t forget to also check the other possible causes listed above and ensure a proper electrical connection.

p1105 error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty Manifold Absolute Pressure (MAP) or an issue with the MAP harness. To fix this, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top