The automobile fault code P1104 indicates a problem with the Manifold Absolute Pressure (MAP) sensor. This can be identified by the Engine Light or Service Engine Soon Warning Light turning on. The possible causes include a faulty MAP sensor, an open or shorted MAP harness, poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).
To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be 1.0. It is important to address this fault code promptly to ensure optimal engine performance.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Unveiling The Symptoms Of Fault Code P1104: A Comprehensive Guide
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1104 fault code.
- The symptoms of the automobile fault code p1104 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: What Causes Fault Code P1104?
The automobile fault code p1104 can be caused by a faulty Manifold Absolute Pressure (MAP), an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).
- The fault code P1104 can be caused by a faulty Manifold Absolute Pressure (MAP) sensor, an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM).
Fixing Code P1104: Simple Steps To Resolve The Issue
To fix the p1104 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1104, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P1104 Fixing Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p1104 include the estimated repair time of 1.0 hour. Most auto repair shops typically charge between $75 and $150 per hour for their services. These factors contribute to the overall cost of resolving the p1104 fault code.
P1104 Fault Code: Understanding The Description And Troubleshooting Tips
The P1104 fault code indicates a low voltage reading from the Manifold Absolute Pressure (MAP) sensor in the engine’s Engine Control Module (ECM). The MAP sensor provides important information about the manifold pressure to the ECM, which is used to calculate air density and determine the engine’s air mass flow rate.
This data is crucial for determining the required fuel metering for optimal combustion. In simpler terms, the MAP sensor helps the engine control system understand how much air is entering the engine. This information is used to ensure the right amount of fuel is injected for efficient combustion.
When the ECM detects a low voltage reading from the MAP sensor, it triggers the P1104 fault code.
This code indicates that there may be an issue with the MAP sensor or its electrical connection, which can affect the engine’s performance and fuel efficiency. It is important to address this issue promptly to avoid further damage to the engine.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P1104 could be the culprit. This code is often caused by a faulty Manifold Absolute Pressure (MAP) sensor, an open or shorted MAP harness, a poor electrical connection in the MAP circuit, or a faulty Engine Control Module (ECM). To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.
If you’re dealing with the p1104 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Manifold Absolute Pressure (MAP) or an issue with the wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step could be the key to resolving the issue and getting your engine running smoothly again.
When resolving the p1104 fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Manifold Absolute Pressure (MAP) harness or circuit, which may be causing the fault code. Don’t forget to also check the other possible causes listed above.
Wrap Up
If your engine light is on or you see the service engine soon warning light, it could be due to a faulty Manifold Absolute Pressure (MAP) or an issue with the MAP harness. To fix this, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.
