The automobile fault code P10CC indicates a problem with the Fuel Indirect Injector. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Fuel Indirect Injector, an open or shorted Fuel Indirect Injector harness, or a poor electrical connection in the Fuel Indirect Injector circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair for this fault code typically takes around 1.0 hour.

By addressing this issue promptly, you can ensure the proper functioning of your vehicle’s fuel system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p10cc fault code.

  • The symptoms of the automobile fault code P10CC include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p10cc can be caused by a faulty fuel indirect injector, an open or shorted injector harness, or a poor electrical connection in the injector circuit.

  • The fault code P10CC can be caused by the following: a faulty fuel indirect injector, an open or shorted fuel indirect injector harness, and a poor electrical connection in the fuel indirect injector circuit.

Discover the potential solutions for the p10cc fault code by examining the wiring harness, connectors, and components for any signs of damage or corrosion.

  • To fix the automobile fault code p10cc, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code P10CC based on the estimated repair time of 1.0 hour include the following: 1. Repair Time: The estimated repair time of 1.0 hour is a significant factor in determining the overall cost. 2.

Labor Charges: Most auto repair shops charge between $75 and $150 per hour for labor, which will contribute to the total cost. 3.

Diagnostic Fee: Some shops may charge a separate diagnostic fee to identify the specific fault code, which can add to the overall cost. 4. Parts and Materials: Depending on the nature of the fault, there may be a need for replacement parts or additional materials, which will impact the final cost. 5.

Shop Rates: The hourly rates charged by different repair shops can vary, so it’s essential to consider this factor when calculating the overall cost. By considering these factors, you can get a better understanding of the potential cost involved in diagnosing and fixing the P10CC fault code.

The P10CC fault code is related to the Exhaust Aftertreatment Fuel Injector Control Circuit. The Powertrain Control Module (PCM) is responsible for monitoring the Indirect Injector, and if it detects that the Indirect Injector is not operating within the factory specifications, it will set the P10CC code. This code indicates a problem with the control circuit of the fuel injector in the exhaust aftertreatment system.

It is important to address this issue promptly to ensure proper functioning of the vehicle’s emissions control system.

What are the possible causes of the automobile fault code P10CC?

If you see the engine light or service engine soon warning light on, the fault code P10CC could be the culprit. This code is often caused by a faulty fuel indirect injector, an open or shorted fuel indirect injector harness, or a poor electrical connection in the fuel indirect injector circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the P10CC fault code?

If you’re dealing with the P10CC fault code and notice that your engine light is on, it’s time to take action. The most common causes for this code are a faulty fuel indirect injector, an open or shorted fuel indirect injector harness, or a poor electrical connection in the fuel indirect injector circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. This step is crucial in identifying and resolving the problem.

What should I look for when checking for damaged components and connector’s pins to resolve the P10CC fault code?

When resolving the P10CC fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Fuel Indirect Injector or its circuit connections, which may be causing the Engine Light to turn on.

p10cc error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Fuel Indirect Injector. To fix this, visually inspect the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top