The automobile fault code P107B indicates a problem with the Variable Valve Timing (VVT) Servo Motor. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.
The cause of this fault code can be a faulty VVT Servo Motor, an open or shorted harness, or a poor electrical connection in the VVT Servo Motor circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to prevent further damage to the engine.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P107B
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p107b fault code.
- The symptoms of the automobile fault code p107b include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P107B?
The automobile fault code p107b can be caused by a faulty Variable Valve Timing (VVT) Servo Motor, an open or shorted Variable Valve Timing Servo Motor harness, or a poor electrical connection in the Variable Valve Timing Servo Motor circuit.
- The fault code P107B can be caused by the following: 1.
- Faulty Variable Valve Timing (VVT) Servo Motor.
- 2.
- Open or shorted Variable Valve Timing Servo Motor harness.
- 3.
- Poor electrical connection in the Variable Valve Timing Servo Motor circuit.
Fixing Code P107B: Simple Steps To Get Your Car Running Smoothly!
To fix the automobile fault code p107b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p107b, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P107B – Cost And Complexity Unveiled!
The factors influencing the diagnosis and fixing cost of the automobile fault code p107b are the estimated repair time and the hourly rate charged by auto repair shops.
The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p107b fault code.
P107B Fault Code: Understanding The Description And Troubleshooting Tips
The P107B fault code refers to the VVT (Variable Valve Lift Control) Overload Protection Control Motor Temperature being too high. This code is related to the Valvetronic system, which helps reduce fuel consumption by adjusting the stroke of the intake valves. In the Valvetronic system, an electric motor drives a worm gear that moves the eccentric shaft.
The eccentric shaft uses intermediate levers to change the effect of the camshaft on the rocker arms.
The DME (Digital Motor Electronics) monitors the servo motor temperature and calculates it using a model. When the VVT motor temperature exceeds a warning threshold of 190°C, the VVT system switches to its emergency mode.
This is done to prevent further overheating. However, if the VVT motor temperature continues to rise and reaches the deactivation threshold of 200°C, the VVT system will be completely deactivated. The P107B fault code indicates that the VVT motor temperature has exceeded the safe limit, and the system is taking measures to protect itself from further damage.
It is important to address this issue promptly to prevent any potential damage to the Valvetronic system.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P107B could be the culprit. This code is often caused by a faulty Variable Valve Timing (VVT) Servo Motor or issues with the wiring harness and connectors. To fix the problem, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors. It’s also a good idea to check the “Possible Causes” listed above for further troubleshooting.
If you’re dealing with the p107b fault code and your engine light is on, it’s time to take action. The most common cause of this issue is a faulty Variable Valve Timing (VVT) Servo Motor. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying any open or short circuits or poor electrical connections. Don’t delay, get to the bottom of the issue and get your engine running smoothly again.
When resolving the p107b fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. By addressing these issues, you can effectively fix the problem and prevent further complications.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Variable Valve Timing (VVT) Servo Motor. To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.
