The automobile fault code P102E indicates a problem with the Glow Plug Control Module. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Glow Plug Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.
To fix this problem, you should visually inspect the wiring harness and connectors for any damage.
Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.
It is important to address this fault code promptly to ensure proper functioning of the vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P102E
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p102e fault code.
- The symptoms of the automobile fault code p102e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P102E?
The automobile fault code p102e can be caused by a faulty Glow Plug Control Module, an open or shorted harness, or a poor electrical connection in the circuit.
- The fault code P102E can be caused by the following: a faulty Glow Plug Control Module, an open or shorted harness in the Glow Plug Control Module, and a poor electrical connection in the Glow Plug Control Module circuit.
Fixing Code P102E: Simple Steps To Resolve The Issue
To fix the automobile fault code p102e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p102e, first, check the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P102E – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p102e are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services.
These factors will determine the overall cost of diagnosing and fixing the p102e fault code.
P102E Fault Code: Understanding The Description And Troubleshooting Tips
The P102E fault code indicates a problem with the Glow Plug Control Module’s temperature sensor 3. This module is responsible for monitoring the temperature of the microprocessor and the glow plug drivers.
If the temperature sensor 3 is not within 12°C (54°F) of temperature sensor 2 and the difference between temperature sensor 1 and sensor 2 is less than 12°C (54°F) for more than 2 seconds, a Diagnostic Trouble Code (DTC) will be triggered. The Glow Plug Control Module will then send a message to the Engine Control Module (ECM) to set this DTC.
It is important to address this issue to ensure proper functioning of the glow plug system.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P102E could be the culprit. This code is often caused by a faulty glow plug control module, an open or shorted harness, or a poor electrical connection in the glow plug control module circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
To fix the P102E fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the Glow Plug Control Module or its circuit. Don’t forget to check the “Possible Causes” mentioned above for a comprehensive solution.
When resolving the P102E fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing so, you can identify any issues with the Glow Plug Control Module or its circuit connections. This step is crucial in resolving the fault code and ensuring the proper functioning of the engine.
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Glow Plug Control Module. To fix this, visually inspect the wiring harness and connectors for any damage.
Also, check for broken, bent, pushed out, or corroded connector pins.
