The automobile fault code P0D66 indicates a problem with the HybridEV Battery Pack Cooling Fan. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty cooling fan, an open or shorted harness, poor electrical connection, or a faulty StarterGenerator Control Module.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle’s hybrid or electric system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d66 fault code.

  • The symptoms of the automobile fault code p0d66 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d66 can be caused by a faulty HybridEV Battery Pack Cooling Fan, an open or shorted harness, a poor electrical connection in the circuit, or a faulty StarterGenerator Control Module.

  • The fault code p0d66 can be caused by the following: a faulty Hybrid/EV Battery Pack Cooling Fan, an open or shorted Hybrid/EV Battery Pack Cooling Fan harness, a poor electrical connection in the Hybrid/EV Battery Pack Cooling Fan circuit, or a faulty Starter/Generator Control Module.

To fix the automobile fault code p0d66, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d66, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code p0d66 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0D66 fault code refers to a problem with the hybridEV battery pack cooling fan enable circuit. This circuit is responsible for controlling the fan that draws air through the battery pack to regulate its temperature.

The cooling fan receives an enable signal from the startergenerator control module, which is controlled by a discrete high side driver.

When the enable control circuit is high, the fan is enabled to run. The P0D66 code indicates that there is a high voltage issue with the enable circuit of the cooling fan.

This means that there may be an open circuit or a short to voltage in the enable circuit.

To diagnose this issue, the diagnostics for the P0D66 code run continuously until the cooling fan is enabled to run. If there is a short to ground, the diagnostics will run after the fan is enabled.

These diagnostics are designed to detect and report any failure in the fan enable circuits.

If you encounter the P0D66 fault code, it is important to have the enable circuit of the hybridEV battery pack cooling fan checked and repaired to ensure proper cooling of the battery pack and prevent any further issues.

What are the possible causes for the automobile fault code p0d66?

If you see the engine light on or the service engine soon warning light, the fault code P0D66 could be the culprit. This code is often caused by a faulty hybrid/EV battery pack cooling fan, an open or shorted harness, a poor electrical connection in the cooling fan circuit, or a faulty starter/generator control module. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the p0d66 fault code?

If you’re dealing with the p0d66 fault code and your engine light is on, it’s time to take action. The most likely cause is a faulty Hybrid/EV Battery Pack Cooling Fan or a poor electrical connection in the fan circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This step is crucial in identifying and resolving the problem. Don’t delay, get to work on those connectors and harnesses!

What should I look for when checking for damaged components and corroded connector’s pins to resolve the p0d66 fault code?

To resolve the p0d66 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. This can help identify any issues with the Hybrid/EV Battery Pack Cooling Fan or the Starter/Generator Control Module. By checking for these potential causes, you can take the necessary steps to fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p0d66 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0d66 fault code might be the culprit. This code is usually caused by a faulty HybridEV Battery Pack Cooling Fan, an open or shorted harness, a poor electrical connection in the cooling fan circuit, or a faulty StarterGenerator Control Module.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top