The automobile fault code P0D54 indicates a problem with the battery charger.

When this fault code is triggered, the engine light or service engine soon warning light will turn on. The possible causes for this issue include a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d54 fault code.

  • The symptoms of the automobile fault code p0d54 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d54 can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

  • The fault code p0d54 can be caused by: a faulty battery charger, an open or shorted battery charger harness, and poor electrical connection in the battery charger circuit.

To fix the automobile fault code p0d54, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d54, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of fixing the automobile fault code p0d54 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0D54 fault code is related to the battery charger in a hybrid or electric vehicle. The battery charger has its own diagnostic system to detect any faults. It communicates the diagnostics and system status to the hybridEV powertrain control module 2 through serial data.

This module acts as the host controller for Diagnostic Trouble Code (DTC) information.

The P0D54 code specifically refers to internal measurements of the battery charger that verify its proper performance.

It checks internal voltages, currents, and temperatures to ensure they are within the correct range. If the output current sensor circuit has a high voltage, this fault code will be triggered.

What are the possible causes for the automobile fault code p0d54?

If you see the engine light or service engine soon warning light on and you have a fault code of p0d54, it could be due to a faulty battery charger or issues with the battery charger harness. The circuit may have a poor electrical connection or the harness could be open or shorted. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the fault code p0d54?

If you’re dealing with the fault code p0d54 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix it, check the possible causes mentioned earlier and visually inspect the wiring harness and connectors. Look out for damaged components and check for any broken, bent, pushed out, or corroded pins in the connectors.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0d54?

When troubleshooting the fault code p0d54, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection or an open/short circuit in the battery charger system, leading to the engine light being ON. By checking and addressing these potential causes, you can resolve the fault code and ensure proper functioning of the battery charger.

p0d54 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0d54 fault code might be the culprit.

This code is usually caused by a faulty Battery Charger, an open or shorted Battery Charger harness, or a poor electrical connection in the Battery Charger circuit. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top