The automobile fault code P0D49 indicates a problem with the battery charger. The most common symptom is the engine light being ON or the service engine soon warning light.

The cause of this fault code can be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this problem is estimated to be around 1.0. To interpret the fault code, you can refer to the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d49 fault code.

  • The symptoms of the automobile fault code p0d49 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d49 can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

  • The fault code p0d49 can be caused by the following: a faulty battery charger, an open or shorted battery charger harness, and poor electrical connection in the battery charger circuit.

To fix the automobile fault code p0d49, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d49, you need to follow these steps: – Check the possible causes mentioned above.
  • – Visually inspect the wiring harness and connectors related to the fault code.
  • – Look for any damaged components.
  • – Check for broken, bent, pushed out, or corroded pins in the connectors.
  • – Estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0d49 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0d49 fault code.

The P0D49 fault code is related to the battery charger in your automobile.

It is a diagnostic code that indicates a fault condition in the battery charger system. The battery charger itself is responsible for diagnosing its own systems and detecting any issues. The battery charger communicates its diagnostics and system status to the hybridEV powertrain control module 2 through serial data.

This control module acts as the host controller for Diagnostic Trouble Code (DTC) information.

The P0D49 code specifically refers to internal measurements taken by the battery charger to ensure it is functioning properly.

These measurements include voltages, currents, and temperatures.

If any of these measurements fall outside the acceptable range, the P0D49 code will be triggered.

What are the possible causes for the automobile fault code p0d49?

If you see the engine light or service engine soon warning light on and you have a fault code of p0d49, it could be due to a faulty battery charger or issues with the battery charger harness. The circuit may have a poor electrical connection or the harness could be open or shorted. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the fault code p0d49?

If you’re dealing with the fault code p0d49 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0d49?

When troubleshooting the fault code p0d49, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can resolve the fault code and ensure proper functioning of the battery charger.

p0d49 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery Charger.

To fix this, check the possible causes mentioned above. Take a close look at the wiring harness and connectors, and inspect for any damage or corrosion.

Scroll to Top