The automobile fault code P0D44 indicates a problem with the battery charger.

The most common symptom is the engine light being ON or the service engine soon warning light appearing. The cause of this fault code can be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this problem is estimated to be around 1.0.

To interpret the fault code, you can refer to the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d44 fault code.

  • The symptoms of the automobile fault code p0d44 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d44 can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

  • The fault code p0d44 can be caused by the following: a faulty battery charger, an open or shorted battery charger harness, and poor electrical connection in the battery charger circuit.

To fix the automobile fault code p0d44, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d44, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0d44 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0d44 fault code.

The P0D44 fault code refers to a low voltage condition in the battery charger’s 14V output voltage sensor circuit.

The battery charger control module is responsible for diagnosing its own systems and detecting any faults.

It communicates diagnostic information and system status to the hybrid powertrain control module 2 through serial data. To ensure proper performance, the battery charger control module measures internal voltages, currents, and temperatures. It then verifies that these measurements are within the appropriate range.

The P0D44 code specifically indicates that the voltage sensor circuit for the battery charger’s 14V output is experiencing a low voltage condition.

This fault code helps identify potential issues with the battery charger’s output voltage sensor circuit.

What are the possible causes for the automobile fault code p0d44?

If you see the engine light or service engine soon warning light on, the fault code P0D44 could be the culprit. This code is often caused by a faulty battery charger or issues with the battery charger harness, such as an open or shorted circuit. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any damaged components or broken, bent, pushed out, or corroded connector pins. Checking these possible causes can help you get to the bottom of the issue and resolve it effectively.

How can I visually inspect the wiring harness and connectors to fix the fault code p0d44?

If you’re dealing with the fault code p0d44 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components and corroded connector’s pins to resolve the fault code p0d44?

When troubleshooting the fault code P0D44, start by checking for damaged components and corroded connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can resolve the fault code and ensure proper functioning of the battery charger.

p0d44 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery Charger. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken or bent pins on the connectors.

Scroll to Top